Table of Contents
Advertisement
Fiber-Optic Cables and Connectors
Fiber-Optic Cables and Connectors
Because invisible radiation may be emitted from the aperture of the port when no fiber cable is
Warning
connected, avoid exposure to radiation and do not stare into open apertures. Statement 1056
Class 1 laser product. Statement 1008
Warning
Use a single-mode or multimode fiber-optic interface cable to connect your Cisco uBR7225VXR router
to another router or switch. In general, multimode cables are gray or orange, and single-mode cables are
yellow. For Ethernet and multimode fiber-optic connections, use one duplex SC-type connector
(Figure
Figure C-5
Figure C-6
Attach either one duplex fiber cable or two simplex fiber cables between the digital pulse terminator
(DPT) port adapter and the device to which the DPT port adapter is connected. Observe the receive (RX)
and transmit (TX) cable relationship shown in
Figure C-7
Simplex
Cisco uBR7225VXR Universal Broadband Router Hardware Installation Guide
C-6
C-5) or two simplex SC-type connectors. (See
Duplex SC Cable Connector
Simplex SC Cable Connector
Attaching Simplex or Duplex Fiber-Optic Cables
SONET/SDH with simplex
or duplex SC connectors
RX TX
Duplex
To network
Figure
C-6.)
Figure
C-7.
Appendix C
Cable Specifications
OL-17309-01
Advertisement
Table of Contents
Troubleshooting
