Table of Contents
Advertisement
Chapter 3
Installing the Cisco uBR7225VXR Router
Before working on equipment that is connected to power lines, remove jewelry (including rings,
Warning
necklaces, and watches). Metal objects will heat up when connected to power and ground and can
cause serious burns or weld the metal object to the terminals. Statement 43
This equipment is intended to be grounded to comply with emission and immunity requirements.
Warning
Ensure that the switch functional ground lug is connected to earth ground during normal use.
Statement 1064
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
Warning
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Detailed instructions for handling and replacing the Cisco uBR7225VXR router power supplies are
Note
contained in the Cisco uBR7200 Series Universal Broadband Router AC-Input Power Supply
Replacement Instructions at the following URL:
http://www.cisco.com/en/US/docs/cable/cmts/ubr7200/installation/4848pwra.html
Connecting to the AC-Input Power Supply
Warning
The device is designed to work with TN power systems. Statement 19
Note
A certified external Surge Protective Device (SPD) is used at the AC-input of the Cisco uBR7225VXR
universal broadband router.
To connect to the AC-input power supply:
At the rear of the Cisco uBR7225VXR universal broadband router, ensure that the power switch on the
Step 1
power supply is in the off (0) position.
Plug in the power cable.
Step 2
OL-17309-01
Cisco uBR7225VXR Universal Broadband Router Hardware Installation Guide
Connecting Power
3-17
Advertisement
Table of Contents
Troubleshooting
