Table of Contents
Advertisement
Chapter 39
Configuring NTP
Offset: 1440 minutes (1 day)
Recurring: no
Console> (enable)
Disabling the Daylight Saving Time Adjustment
To disable the daylight saving time clock adjustment, perform this task in privileged mode:
Task
Step 1
Disable the daylight saving time clock adjustment.
Step 2
Verify the configuration.
This example shows how to disable the daylight saving time adjustment:
Console> (enable) set summertime disable Arizona
Summertime is disabled and set to 'Arizona'
Console> (enable)
Clearing the Time Zone
To clear the time zone settings and return the time zone to UTC, perform this task in privileged mode:
Task
Clear the time zone settings.
This example shows how to clear the time zone settings:
Console> (enable) clear timezone
Timezone name and offset cleared
Console> (enable)
Clearing NTP Servers
To clear an NTP server address from the NTP servers table on the switch, perform this task in privileged
mode:
Task
Step 1
Clear an NTP server address from the NTP server
table.
Step 2
Verify the NTP configuration.
This example shows how to clear an NTP server address from the NTP server table:
Console> (enable) clear ntp server 172.16.64.10
NTP server 172.16.64.10 removed.
Console> (enable)
78-15486-01
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2980G Switches Software Configuration Guide
Configuring NTP on the Switch
Command
set summertime disable [zone_name]
show summertime
Command
clear timezone
Command
clear ntp server [ip_addr | all]
show ntp [noalias]
—
Release 8.1
39-7
- Quick Links:
- Configuration Guide
- Catalyst 2980G Switch
Hide quick links:
Advertisement
Table of Contents
