Cisco MDS 9124 - Fabric Switch Reference page 1498

Cisco mds 9000 family command reference - cisco mds san-os release 3.0(1) through 3.3(1a) (ol-16217-01, april 2008)

Hide thumbs Also See for Cisco MDS 9124 - Fabric Switch:

Table of Contents

username (iSCSI initiator configuration and iSLB initiator configuration)

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

username (iSCSI initiator configuration and iSLB initiator

configuration)

To assign a username for iSCSI login authentication, use the username command in iSCSI initiator

configuration submode. To assign a username for iSLB login authentication, use the username

command in iSLB initiator configuration submode.To disable this feature, use the no form of the

Syntax Description

Command Modes

iSCSI initiator configuration submode.

iSLB initiator configuration submode.

Command History

Usage Guidelines

The following example assigns the username for iSCSI login authentication of an iSCSI initiator.

switch# config terminal

Enter configuration commands, one per line.

switch(config)# iscsi initiator name iqn.1987-02.com.cisco.initiator

switch(config-iscsi-init)# username iSCSIloginUsername

switch(config-iscsi-init)#

The following example assigns the username tester for iSLB login authentication of an iSLB initiator.

switch# config t

switch(config)# islb initiator ip-address 100.10.10.10

switch(config-iscsi-islb-init)# username ?

switch(config-iscsi-islb-init)# username tester

The following example removes the username tester for an iSLB initiator.

switch (config-iscsi-islb-init)# no username tester

Cisco MDS 9000 Family Command Reference

username username

no username username

Specifies the username for iSCSI or iSLB login authentication.

Modification

This command was introduced.

Added iSLB initiator configuration submode.

Enter username <Max Size - 32>

End with CNTL/Z.

OL-16217-01, Cisco MDS SAN-OS Release 3.x