Show Rmon - Cisco MDS 9124 - Fabric Switch Reference

Cisco mds 9000 family command reference - cisco mds san-os release 3.0(1) through 3.3(1a) (ol-16217-01, april 2008)

Hide thumbs Also See for Cisco MDS 9124 - Fabric Switch:

Table of Contents

show rmon

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

The following example displays the configured high-capacity RMON alarms.

switch# show rmon hcalarms

High Capacity Alarm 1 is active, owned by cseSysCPUUtilization.0@test

Monitors 1.3.6.1.4.1.9.9.305.1.1.1.0 every 10 second(s)

Taking absolute samples, last value was 0

Rising threshold is 60, assigned to event 4

Falling threshold is 59, assigned to event 4

On startup enable rising alarm

Number of Failed Attempts is 0

The following example displays the RMON event log located on the switch.

switch# show rmon logs

Related Commands

rmon hcalarm

show snmp host

Cisco MDS 9000 Family Command Reference

1 WARNING(4)Falling alarm 1, fired at 0 days 0:02:23 uptime

iso.3.6.1.4.1.9.9.305.1.1.1.0=17 <= 59

1 INFORMATION(5)Startup Falling alarm 1, fired at 0 days 0:02:23 uptime

iso.3.6.1.4.1.9.9.305.1.1.1.0=17 <= 59

2 INFORMATION(5)Falling alarm 1, fired at 0 days 0:02:33 uptime

iso.3.6.1.4.1.9.9.305.1.1.1.0=17 <= 59

Configures the 32-bit RMON alarm.

Configures an RMON event.

Configures the 64-bit RMON alarm.

Displays the SNMP trap destination information.

Show Commands

OL-16217-01, Cisco MDS SAN-OS Release 3.x