Zone Mode Enhanced Vsan - Cisco MDS 9124 - Fabric Switch Reference

Cisco mds 9000 family command reference - cisco mds san-os release 3.0(1) through 3.3(1a) (ol-16217-01, april 2008)

Hide thumbs Also See for Cisco MDS 9124 - Fabric Switch:

Table of Contents

zone mode enhanced vsan

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

zone mode enhanced vsan

To enable enhanced zoning for a VSAN, use the zone mode enhanced vsan command in configuration

mode. To disable this feature, use the no form of the command.

Syntax Description

Command Modes

Configuration mode.

Command History

Usage Guidelines

Before using the zone mode enhanced vsan command, verify that all switches in the fabric are capable

of working in enhanced zoning mode. If one or more switches are not capable of working in enhanced

zoning mode, then the request to enable enhanced zoning mode is rejected.

When the zone mode enhanced vsan command completes successfully, the software automatically

starts a session, distributes the zoning database using the enhanced zoning data structures, applies the

configuration changes, and sends a release change authorization (RCA) to all switches in the fabric. All

switches in the fabric then enable enhanced zoning mode.

The following example shows how to enable enhanced zoning mode.

switch# config terminal

switch(config)# zone mode enhanced vsan 10

Related Commands

Cisco MDS 9000 Family Command Reference

zone mode enhanced vsan vsan-id

no zone mode enhanced vsan vsan-id

Specifies the VSAN ID. The range is 1 to 4093.

Modification

This command was introduced.

Displays zone information.

OL-16217-01, Cisco MDS SAN-OS Release 3.x