Symptom-To-Fru Index; Beep Symptoms - IBM xSeries 330 Hardware Maintenance Manual
Type 8675
Hide thumbs
Also See for xSeries 330:
- Hardware maintenance manual (158 pages) ,
- Hardware maintenance manual (194 pages)
Table of Contents
Advertisement
Symptom-to-FRU index
This index supports xSeries 330 servers. The Symptom-to-FRU lists symptoms,
errors, and the possible causes. The most likely cause is listed first. Use this
Symptom-to-FRU index to help you decide which FRUs to have available when
servicing the computer.
The POST BIOS displays POST error codes and messages on the screen.
Beep symptoms
Beep symptoms are short tones or a series of short tones separated by pauses
(intervals without sound). See the following examples.
Note: One beep after successfully completing POST indicates the system is
Beeps
1-2-3
4
Beep/Symptom
1-1-2 (Processor register test failed)
1-1-3 (CMOS write/read test failed)
1-1-4 (BIOS EEPROM checksum
failed)
1-2-1 (Programmable Interval Timer
failed)
1-2-2 (DMA initialization failed)
1-2-3 (DMA page register write/read
failed)
1-2-4 (RAM refresh verification
failed)
1-3-1 (1st 64K RAM test failed)
1-3-2 (1st 64K RAM parity test
failed)
© Copyright IBM Corp. 2001
functioning properly.
Description
v One beep
v A pause (or break)
v Two beeps
v A pause (or break)
v Three Beeps
Four continuous beeps
FRU/Action
1. Optional Processor (if installed)
2. Processor
1. Battery
2. System Board
1. DIMM
2. System Board
1. System Board
1. System Board
1. System Board
1. DIMM
2. System Board
1. DIMM
2. System Board
1. DIMM
2. System Board
113
Advertisement
Table of Contents
