Cisco Catalyst 2960-S Started Manual page 10
Switch getting
Hide thumbs
Also See for Catalyst 2960-S:
- Hardware installation manual (94 pages) ,
- Software configuration manual (980 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
Step 9
Disconnect the switch from the PC, and install the switch in your network. See the
"Rack-Mounting" section on page
Step 10
If you changed the static IP address on your PC in
configured static IP address.
Step 11
You can now manage the switch by using Cisco Network Assistant, Device Manager, or both.
See the
"Managing the Switch" section on page 11
managing the switch.
We strongly recommend that you download Cisco Network Assistant from Cisco.com and use
it to manage the switch. See the
about configuring and managing the switch.
You can display Device Manager by following these steps:
Start a web browser on your PC or laptop.
1.
Enter the switch IP address, username, and password (assigned in
2.
browser, and press Enter. The Device Manager page appears.
Troubleshooting:
If Device Manager does not appear:
Confirm that the port LED for the switch port connected to your network is green.
•
Confirm that the PC or laptop you are using to access the switch has network connectivity
•
by connecting to a well-known web server in your network. If there is no network
connection, troubleshoot the network settings on the PC or laptop.
Make sure that the switch IP address in the browser is correct.
•
If switch IP address in the browser is correct, the switch interface LED is green, and the
•
PC or laptop has network connectivity, continue troubleshooting by reconnecting the PC
or laptop to the switch. Configure a static IP address on the PC or laptop that is in the
same subnet as the switch IP address. For example:
If your switch IP address is 172.20.20.85 and your PC or laptop IP address is
–
172.20.20.84, both devices are in the same network.
If your switch IP address is 172.20.20.85 and your PC or laptop IP address is
–
10.0.0.2, the devices are in different networks and cannot communicate directly.
•
When the LED on the switch port connected to the PC or laptop is green, reenter the IP
address of the switch in a web browser to display Device Manager. Once Device Manager
appears, you can continue with the switch configuration.
Catalyst 2960-S Switch Getting Started Guide
10
18.
Step
for information about configuring and
"Managing the Switch" section on page 11
Catalyst 2960-S Switch Getting Started Guide
2, change it back to the previously
for information
Step
7) in the web
OL-19793-02
Hide quick links:
Advertisement
Table of Contents
