Cisco Catalyst 4500 Series Command Reference Manual page 671
Cisco ios command reference release ios xe 3.4.0sg and ios 15.1(2)sg
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Service-policy input: p1
This example shows how to attach a policy map to a VLAN using a Supervisor Engine 6-E:
Switch# configure terminal
Switch(config)#vlan configuration 20
Switch(config-vlan-config)#service-policy out policy-vlan
Switch(config-vlan-config)#end
Switch#
Related Commands
Command
class-map
policy-map
service-policy (interface
configuration)
show policy-map interface
vlan
OL-27596 -01
Class-map: class-default (match-any)
0 packets
Match: any
0 packets
police: Per-interface
Conform: 0 bytes Exceed: 0 bytes
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Description
Creates a class map to be used for matching packets to the class
whose name you specify and to enter class-map configuration
mode.
Creates a policy map that can be attached to multiple ports to
specify a service policy and to enter policy-map configuration
mode.
Attaches a policy map to an interface.
Displays the QoS policy-map information applied to a specific
VLAN on an interface.
service-policy (interface configuration)
2-613
- Quick Links:
- Show Commands
Hide quick links:
Advertisement
Table of Contents
