Cisco Catalyst 4500 Series Command Reference Manual page 753
Cisco ios command reference release ios xe 3.4.0sg and ios 15.1(2)sg
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Age of the port in the current state: 02h:33m:17s
Port-channel: Po1
------------
Age of the Port-channel
Logical slot/port
GC
Passive port list
Port state
Ports in the Port-channel:
Index
-------------------
Switch#
This example shows how to display a one-line summary per channel group:
Switch# show etherchannel summary
Flags:
Number of channel-groups in use: 2
Number of aggregators:
Group
------+-------------+-----------+-----------------------------------------------
1
Switch#
This example shows how to display EtherChannel port information for all ports and all groups:
Switch# show etherchannel port
Group: 1
----------
Port: Fa5/4
------------
Port state
Channel group = 1
Port-channel
Port indx
Flags:
Timers: H - Hello timer is running.
Local information:
OL-27596 -01
Port-channels in the group:
----------------------
= 02h:33m:52s
= 10/1
= 0x00000000
= Fa5/4 Fa5/5
= Port-channel L3-Ag Ag-Not-Inuse
Load
Port
D - down
P - bundled in
I -
stand-alone s - suspended
H - Hot-standby (LACP only)
R
- Layer3
S -
Layer2
U - in use
f - failed to allocate
M - not in
use, minimum links not
u - unsuitable for
bundling
w - waiting to be
aggregated
d - default
port
Port-channel
Protocol
Po1(SD)
LACP
Channel-group listing:
-----------------------
Ports in the group:
-------------------
= EC-Enbld Down Not-in-Bndl Usr-Config
Mode = Desirable
= null
GC
= 0
Load = 0x00
S - Device is sending Slow hello.
A - Device is in Auto mode.
S - Switching timer is running.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Number of ports in agport = 0
HotStandBy port = null
port-channel
aggregator
met
2
Ports
Gi1/23(H)
Gi1/24(H)
Gcchange = 0
= 0x00000000
Psudo-agport = Po1
C - Device is in Consistent state.
P - Device learns on physical port.
Q - Quit timer is running.
I - Interface timer is running.
Hello
Partner
PAgP
show etherchannel
Learning
Group
2-695
- Quick Links:
- Show Commands
Hide quick links:
Advertisement
Table of Contents
