D-Ewag Configuration; Creating And Configuring The D-Ewag Service; Creating The D-Ewag Service - Cisco ASR 5000 Administration Manual
Enhanced wireless access gateway
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (294 pages) ,
- Installation procedure (8 pages)
Table of Contents
Advertisement
DHCP-based Enhanced Wireless Access Gateway Configuration
D-eWAG Configuration
This section describes how to configure the D-eWAG service.
1. Create and configure the D-eWAG service as described in the
section.
2. Create and configure a DHCP service for D-eWAG as described in the
3. Create/configure subscriber template for D-eWAG as described in the
section.
4. Create and configure an SGTP service for D-eWAG as described in the
5. Save your configuration to the flash memory, an external memory device, and/or a network location using the
Exec Mode command
configuration files, refer to the System Administration Guide and the Command Line Interface Reference.
Important:
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
Creating and Configuring the D-eWAG Service
This section describes how to create and configure the D-eWAG service.
Creating the D-eWAG Service
Configuring the D-eWAG Service
Creating the D-eWAG Service
To create the D-eWAG service use the following configuration:
configure
context <context_name> [ -noconfirm ]
ipsg-service <ewag_service_name> mode radius-server ewag [ -noconfirm ]
end
Notes:
The
ewag
RADIUS Server Configuration Mode, which is common for the eWAG and IPSG services.
Important:
From configuration perspective, note that the D-eWAG service is the IPSG
service configured in D-eWAG mode. There is no separate D-eWAG configuration mode.
save configuration
Commands used in the configuration examples in this section provide base functionality to the extent
keyword enables the D-eWAG service (IPSG service in D-eWAG mode), and enters the IPSG
Creating and Configuring the D-eWAG Service
Configuring DHCP Service
Configuring the Subscriber Template
. For additional information on how to verify and save
Cisco ASR 5000 Enhanced Wireless Access Gateway Administration Guide ▄
D-eWAG Configuration ▀
Configuring the SGTP Service
section.
section.
101
Advertisement
Table of Contents
