Table of Contents
Advertisement
Optimized for servers
The POWER7 processor forms the basis of a flexible compute platform and can be offered in
a number of guises to address differing system requirements.
The POWER7 processor can be offered with a single active memory controller with four
channels for servers where higher degrees of memory parallelism are not required.
Similarly, the POWER7 processor can be offered with a variety of SMP bus capacities
appropriate to the scaling-point of particular server models.
Figure 2-6 shows the physical packaging options that are supported with POWER7
processors.
Figure 2-6 Outline of the POWER7 processor physical packaging
2.2.6 On-chip L3 intelligent cache
A breakthrough in material engineering and microprocessor fabrication has enabled IBM to
implement the L3 cache in eDRAM and place it on the POWER7 processor die. L3 cache is
critical to a balanced design, as is the ability to provide good signalling between the L3 cache
and other elements of the hierarchy, such as the L2 cache or SMP interconnect.
The on-chip L3 cache is organized into separate areas with differing latency characteristics.
Each processor core is associated with a Fast Local Region of L3 cache (FLR-L3) but also
has access to other L3 cache regions as shared L3 cache. Additionally, each core can
negotiate to use the FLR-L3 cache associated with another core, depending on reference
patterns. Data can also be cloned to be stored in more than one core's FLR-L3 cache, again
depending on reference patterns. This
processor to optimize the access to L3 cache lines and minimize overall cache latencies.
44
IBM BladeCenter PS703 and PS704 Technical Overview and Introduction
intelligent cache
management enables the POWER7
Advertisement
Table of Contents
