Installing The Switch; Rack-Mounting - Cisco Catalyst 3750 Hardware Installation Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
Installing the Switch
Side-by-Side Mounting in a Rack or on a Wall
Figure and
wall-mounted side-by-side. Use the 1-meter and 3-meter StackWise cables to connect the switches.
These configuration provide redundant connections.
Figure 2-7
Figure 2-8
Installing the Switch
This section describes these installation procedures:
•
•
•
Rack-Mounting
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
Warning
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
•
•
•
Catalyst 3750 Switch Hardware Installation Guide
2-12
Figure 2-8
are examples of recommended configurations where the switches are rack- or
Stacking up to Eight Switches in a Side-by-Side Mounting Configuration
Stacking Nine Switches in a Side-by-Side Mounting Configuration
Rack-Mounting, page 2-12
Wall-Mounting, page 2-29
Table- or Shelf-Mounting, page 2-32
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in
the rack.
Statement 1006
Chapter 2
Switch Installation
OL-6336-06
Advertisement
Chapters
Table of Contents
