Cisco 800 Series Hardware Installation Manual page 144
800 series integrated services router
Hide thumbs
Also See for 800 Series:
- Design manual (50 pages) ,
- Release notes (36 pages) ,
- Configuring (32 pages)
Table of Contents
Advertisement
Cisco 860, 880, 890 Series
Because the LED indicators are shared, the LED illuminates (green) when either port is active. For
example, the LED indicator labeled BRI 1 B1 illuminates when either the BRI1 B1 channel is active or
when the FXS port is active. You can determine the activity status on each interface by using the
following commands.
•
•
Figure 1-79
Figure 1-79
Memory
The Cisco 860 series, 880 series, and 890 series routers contain flash memory and main memory.
Flash Memory
The Cisco 860 series, 880 series, and 890 series ISRs use non-upgradable flash memory storage. The
onboard flash memory contains the Cisco IOS software image, the boot flash contains the ROMMON
boot code, and a separate non-volatile flash contains the cookie configuration.
Table 1-45
Table 1-45
Models
Cisco 860 series and 880 series routers
Cisco 880 series voice routers and Cisco 890 series routers 256 MB
Cisco 880 series routers with embedded WLAN antennas 256 MB
Cisco 860VAE routers
Cisco 860VAE-K9
Cisco Integrated Services Router Hardware Installation Guide
1-124
For activity status on the FXS ports, use the show port summary command.
For activity status on the BRI ISDN port, use the show isdn status command.
shows a close-up view of the LED indicators.
Close-up of the BRI and FXS LED Indicators
describes the default flash memory storage.
Flash Memory Storage
Chapter 1
Flash Memory Storage
128 MB
8 MB boot flash, 128 MB for IOS
64 MB boot flash and IOS
Product Overview
- Quick Links:
- Hardware Features
Hide quick links:
Advertisement
Chapters
Table of Contents
