Table of Contents
Advertisement
Updating the integrated system management firmware
To update the integrated system management firmware for the integrated system
management processor (ISMP), download the Integrated System Management
Firmware Update Utility program for your server from the IBM Support Web site at
http://www.ibm.com/pc/support/. Run the Integrated System Management Firmware
Update Utility to create a diskette to use to update the firmware. The diskette
updates the firmware only and does not affect any device drivers.
Complete the following steps to update the firmware:
1. Turn off the server.
2. Insert the diskette into the diskette drive.
3. Turn on the server. If the server does not start from the diskette, use the
4. From the main menu, select Update System Management Firmware and
5. Follow the instructions on the screen to complete the update.
If there is an error in updating the firmware, try the update again.
20
xSeries 335 Type 8676, Type 8830: Hardware Maintenance Manual and Troubleshooting Guide
Configuration/Setup Utility program to configure the diskette drive as a startup
device. (See "Using the Configuration/Setup Utility program" on page 10.) Then,
start again at step 1.
press Enter.
Advertisement
Table of Contents
Troubleshooting
