Table of Contents
Advertisement
DHCP Server Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Syntax
ip-address
time-server
no time-server
Parameters
•
ip-address
ip-address2
[
Time servers. Up to eight addresses can be specified in one command line.
Command Mode
DHCP Pool Network Configuration mode
DHCP Pool Host Configuration mode
Default Configuration
No time server is defined.
User Guidelines
The time server's IP address should be on the same subnet as the client subnet.
Example
The following example specifies 10.12.1.99 as the time server IP address.
switchxxxxxx(config-dhcp)#
ip-address2
ip-address8
[
...
ip-address8
...
time-server 10.12.1.99
]
]—Specifies the IP addresses of
12
320
Advertisement
Table of Contents
