hit counter script

Cisco Sx350 Cli Manual page 228

Hide thumbs Also See for Sx350:
Table of Contents

Advertisement

8
227
Request-ID is 1 Power management-ID is 1;
Available-Power is 15.4;
Management-Power-Level is 0xFFFFFFFF
Local Interface gi12, MAC Address: 00:00:01:2c:86:9c
TimeToLive: 132
Capabilities: T
VLAN-ID: 1005
Platform: CAT-3000
Field Definitions:
Advertisement version—The version of CDP being used for CDP
advertisements.
Capabilities—The device type of the neighbor. This device can be a router,
a bridge, a transparent bridge, a source-routing bridge, a switch, a host, an
IGMP device, or a repeater.
COS for Untrusted Ports—The COS value with which all packets received
on an untrusted port should be marked by a simple switching device which
cannot itself classify individual packets.
Device ID—The name of the neighbor device and either the MAC address
or the serial number of this device.
Duplex—The duplex state of connection between the current device and
the neighbor device.
Entry address(es)—A list of network addresses of neighbor devices.
Extended Trust—The Extended Trust.
External Port-ID—Identifies the physical connector port on which the CDP
packet is transmitted. It is used in devices, such as those with optical ports,
in which signals from multiple hardware interfaces are multiplexed through
a single physical port. It contains the name of the external physical port
through which the multiplexed signal is transmitted.
Interface—The protocol and port number of the port on the current device.
IP Network Prefix—It is used by On Demand Routing (ODR). When
transmitted by a hub router, it is a default route (an IP address). When
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
CDP Commands

Advertisement

Table of Contents
loading

Table of Contents