Table of Contents
Advertisement
47
Quality of Service (QoS) Commands
Syntax
class-map-name
show class-map [
]
Parameters
class-map-name—Specifies the name of the class map to be displayed. (Length:
1–32 characters)
Command Mode
Privileged EXEC mode
Example
The following example displays the class map for Class1.
switchxxxxxx(config)# show class-map
Class Map matchAny class1
Match access-group mac
47.6 match
Use the match Class-map Configuration mode. command to bind the ACLs that
belong to the class-map being configured. Use the no form of this command to
delete the ACLs.
Syntax
acl-name
match access-group
acl-name
no match access-group
Parameters
acl-name—Specifies the MAC, IP ACL name, or IPv6 ACL name. (Length: 1–32
characters)
Default Configuration
No match criterion is supported.
921
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Advertisement
Table of Contents
