Table of Contents
Advertisement
69
Web Server Commands
69.2 ip http port
To specify the TCP port used by the web browser interface, use the ip http port
Global Configuration mode command. To restore the default configuration, use the
no form of this command.
Syntax
port-number
ip http port
no ip http port
Parameters
port-number
port
—For use by the HTTP server. (Range: 1–65534)
Default Configuration
The default port number is 80.
Command Mode
Global Configuration mode
Example
The following example configures the http port number as 100.
switchxxxxxx(config)#
ip http port 100
69.3 ip http server
To enable configuring and monitoring the device from a web browser, use the ip
http server Global Configuration mode command. To disable this function, use the
no form of this command.
Syntax
ip http server
no ip http server
1317
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Advertisement
Table of Contents
