Table of Contents
Advertisement
62
1195
User Guidelines
The show sessions command displays Telnet sessions to remote hosts opened by
the current Telnet session to the local device. It does not display Telnet sessions to
remote hosts opened by other Telnet sessions to the local device.
Example
The following example displays open Telnet sessions.
switchxxxxxx> show sessions
Connection
Host
----------
-------------
1
Remote router
2
172.16.1.2
The following table describes significant fields shown above.
Field
Description
Connection
The connection number.
Host
The remote host to which the device is connected
through a Telnet session.
Address
The remote host IP address.
Port
The Telnet TCP port number.
Byte
The number of unread bytes for the user to see on
the connection.
62.12 show system
The show system EXEC mode command displays system information.
Syntax
show system
Command Mode
User EXEC mode
Address
Port
----------
-----
172.16.1.1
23
172.16.1.2
23
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
System Management Commands
Byte
----
89
8
Advertisement
Table of Contents
