Table of Contents
Advertisement
61
1179
Parameters
•
hostname—The system hostname will be used as the message origin
identifier.
•
IP—IP address of the sending interface that is used as the message origin
identifier.
•
IPv6—IPv6 address of the sending interface that is used as the message
origin identifier. If the sending interface is IPv4, the IPv4 address will be
used instead.
•
user-defined-id
string
user-defined-id
user. The
Default Configuration
No header is sent apart from the PRI field.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)#
61.15 show logging
To display the logging status and SYSLOG messages stored in the internal buffer,
use the show logging Privileged EXEC mode command.
Syntax
show logging
Parameters
This command has no arguments or keywords.
Default Configuration
None
—Specifies an identifying description chosen by the
argument is the identifying description string.
logging origin-id string "Domain 1, router B"
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
SYSLOG Commands
Advertisement
Table of Contents
