Clearing And Resetting Interfaces And Counters; Table - Cisco Catalyst 2360 Software Configuration Manual
Ios 12.2(53)ey
Hide thumbs
Also See for Catalyst 2360:
- Hardware installation manual (74 pages) ,
- Getting started manual (21 pages)
Table of Contents
Advertisement
Chapter 8
Configuring Interface Characteristics
Table 8-4
Show Commands for Interfaces
Command
show interfaces [interface-id]
show interfaces interface-id status [err-disabled]
show interfaces [interface-id] switchport
show interfaces [interface-id] description
show interface [interface-id] stats
show interfaces interface-id
show interfaces transceiver dom-supported-list
show interfaces transceiver properties
show interfaces [interface-id] [{transceiver
properties | detail}] module number]
show running-config interface [interface-id]
show version
show controllers ethernet-controller interface-id
phy
Clearing and Resetting Interfaces and Counters
Table 8-5
interfaces.
Table 8-5
Clear Commands for Interfaces
Command
clear counters [interface-id]
clear interface interface-id
clear line [number | console 0 | vty number]
To clear the interface counters shown by the show interfaces privileged EXEC command, use the clear
counters privileged EXEC command. The clear counters command clears all current interface counters
from the interface unless you specify optional arguments that clear only a specific interface type from a
specific interface number.
OL-19808-01
Purpose
Display the status and configuration of all interfaces or a specific
interface.
Display interface status or a list of interfaces in the error-disabled
state.
Display administrative and operational status of switching ports.
Display the description configured on an interface or all interfaces and
the interface status.
Display the input and output packets by the switching path for the
interface.
(Optional) Display speed and duplex on the interface.
(Optional) Display Digital Optical Monitoring (DOM) status on the
connect SFP modules.
(Optional) Display temperature, voltage, or amount of current on the
interface.
Display physical and operational status about an SFP module.
Display the running configuration in RAM for the interface.
Display the hardware configuration, software version, the names and
sources of configuration files, and the boot images.
Display the operational state of the auto-MDIX feature on the
interface.
lists the privileged EXEC mode clear commands that you can use to clear counters and reset
Purpose
Clear interface counters.
Reset the hardware logic on an interface.
Reset the hardware logic on an asynchronous serial line.
Monitoring and Maintaining the Interfaces
Catalyst 2360 Switch Software Configuration Guide
8-25
Advertisement
Chapters
Table of Contents
