Copying Image Files By Using Rcp; Preparing To Download Or Upload An Image File By Using Rcp; Downloading An Image File By Using Rcp; Uploading An Image File By Using Rcp - Cisco Catalyst 2360 Software Configuration Manual
Ios 12.2(53)ey
Hide thumbs
Also See for Catalyst 2360:
- Hardware installation manual (74 pages) ,
- Getting started manual (21 pages)
Table of Contents
Advertisement
Chapter B
Working with the Cisco IOS File System, Configuration Files, and Software Images
Command
Step 6
end
Step 7
archive upload-sw
ftp:[[//[username[:password]@]location]/directory]/
image-name.tar.
The archive upload-sw command builds an image file on the server by uploading these files in order:
info, the Cisco IOS image, and the web management files. After these files are uploaded, the upload
algorithm creates the file format.
For the download and upload algorithms to operate properly, do not rename image names.
Caution
Copying Image Files By Using RCP
You can download a switch image from an RCP server or upload the image from the switch to an RCP
server.
You download a switch image file from a server to upgrade the switch software. You can overwrite the
current image with the new one or keep the current image after a download.
You upload a switch image file to a server for backup purposes. You can use this uploaded image for
future downloads to the same switch or another of the same type.
Instead of using the copy privileged EXEC command or the archive tar privileged EXEC command, we
Note
recommend using the archive download-sw and archive upload-sw privileged EXEC commands to
download and upload software image files.
These sections contain this configuration information:
•
•
•
OL-19808-01
Preparing to Download or Upload an Image File By Using RCP, page B-34
Downloading an Image File By Using RCP, page B-35
Uploading an Image File By Using RCP, page B-37
Purpose
Return to privileged EXEC mode.
Upload the currently running switch image to the FTP
server.
•
For //username:password, specify the username and
password. These must be associated with an account on
the FTP server. For more information, see the
"Preparing to Download or Upload an Image File By
Using FTP" section on page
For @location, specify the IP address of the FTP server.
•
For /directory/image-name.tar, specify the directory
•
and the name of the software image to be uploaded.
Directory and image names are case sensitive. The
image-name.tar is the name of the software image to be
stored on the server.
Catalyst 2360 Switch Software Configuration Guide
Working with Software Images
B-29.
B-33
Advertisement
Chapters
Table of Contents
