Cisco Catalyst 2360 Software Configuration Manual page 514
Ios 12.2(53)ey
Hide thumbs
Also See for Catalyst 2360:
- Hardware installation manual (74 pages) ,
- Getting started manual (21 pages)
Table of Contents
Advertisement
Working with Software Images
Command
Step 6
archive download-sw /allow-feature-upgrade
[/directory] /overwrite /reload
tftp:[[//location]/directory]/image-name1.tar
[image-name2.tar image-name3.tar
image-name4.tar]
Step 7
archive download-sw [/directory] /leave-old-sw
/reload
tftp:[[//location]/directory]/image-name1.tar
[image-name2.tar image-name3.tar
image-name4.tar]
Catalyst 2360 Switch Software Configuration Guide
B-36
Chapter B
Working with the Cisco IOS File System, Configuration Files, and Software Images
Purpose
Download the images file from the RCP server to the switch
and overwrite the current image.
•
The /allow-feature-upgrade allows installation of a
software image with a different feature set.
•
(Optional) The /directory option specifies a directory
for the images.
The /overwrite option overwrites the software image in
•
flash memory with the downloaded image.
The /reload option reloads the system after
•
downloading the image unless the configuration has
been changed and not been saved.
For //username, specify the username. For the RCP copy
•
request to execute successfully, an account must be
defined on the network server for the remote username.
For more information, see the
or Upload an Image File By Using RCP" section on
page
B-34.
For @location, specify the IP address of the RCP server.
•
For /directory/image-name1.tar
•
[/directory/image-name2.tar image-name3.tar
image-name4.tar], specify the directory (optional) and
the images to download. Directory and image names are
case sensitive.
Download the images file from the RCP server to the switch
and keep the current image.
•
(Optional) The /directory option specifies a directory
for the images.
•
The /leave-old-sw option keeps the old software version
after a download.
The /reload option reloads the system after
•
downloading the image unless the configuration has
been changed and not been saved.
For //username, specify the username. For the RCP copy
•
request to execute, an account must be defined on the
network server for the remote username. For more
information, see the
an Image File By Using RCP" section on page
For @location, specify the IP address of the RCP server.
•
•
For /directory/image-name1.tar
[/directory/image-name2.tar image-name3.tar
image-name4.tar], specify the directory (optional) and
the images to download. Directory and image names are
case sensitive.
"Preparing to Download
"Preparing to Download or Upload
OL-19808-01
B-34.
Advertisement
Chapters
Table of Contents
