Table of Contents
Advertisement
14
SAN192C-6, SAN384C-6 and SAN768C-6 Installation, Service, and User Guide
Table 3. IBM Supervisor-1E Module LEDs
LED
ID
Status
System
Status
Flashing blue
Off
Green
Red
Flashing Red
Off
Green
Amber
Red
Off
Description
A user has activated this
LED to allow a person to
find this module in the
chassis.
Location identification is
deactivated for this module.
All module diagnostics
passed. The module is
operational.
The module has detected an
error and cannot power on
or boot up.
The module is not properly
inserted.
A bootup or runtime
diagnostic test has failed.
Indicates one of the
following conditions:
The temperature of the
module has exceeded the
safe operating temperature
limits (a major temperature
alarm has occurred). The
module has been shut down
to prevent permanent
damage. The system will be
shut down after two minutes
if this condition is not
cleared.
The module is resetting.
The ejector lever is open.
The module is not receiving
power.
All environmental sensors in
the system are within
operational bounds.
At least one power supply
has failed or the power
supply fan has failed.
The temperature of the
supervisor module exceeded
the major threshold.
The slot has detected a slot
ID parity error
- Quick Links:
- Ibm San192C-6
Hide quick links:
Advertisement
Table of Contents
