Table of Contents
Advertisement
Figure 32. Moving a Chassis onto a Rack or Cabinet - SAN768C-6 Chassis
1. Push the sides of the lower half of the front side of the chassis (do not
push on any of the modules or module handles).
2. Chassis mounting brackets.
3. Rack vertical mounting rails.
4. Bottom support rails
Tip: To adjust the placement of the chassis on the bottom-support rails, you
can use the handles on the sides of the chassis.
5. If the mechanical lift is raised above the height of the bottom-support rails,
gently lower it to the level of the rails or no more than 1/4 inch (0.6 cm)
below the rails. This action helps to prevent the bottom of the chassis from
getting caught on the bottom expansion edges of the bottom-support rails.
Chapter 3. Installing the IBM c-type SAN Device
67
- Quick Links:
- Ibm San192C-6
Hide quick links:
Advertisement
Table of Contents
