Table of Contents
Advertisement
Figure 26. Positioning Bottom-Support Rail - SAN768C-6 Chassis
2. Use a manual Phillips torque screwdriver to attach the bottom-support rail to
56
SAN192C-6, SAN384C-6 and SAN768C-6 Installation, Service, and User Guide
1. Position two bottom-support rails at the lowest RU on the rack.
2. Allow at least 45.5 inches (115.6 cm) (26 RU) for each chassis.
the rack using at least three or four M6 x 19 mm or 12-24 x 3/4 inch screws for
each end of the rail (using a total of 6 to 8 screws for the rail as shown
Figure 27 on page 57 ) and tighten each screw to 40 in. lbs (4.5 N.m) of torque.
- Quick Links:
- Ibm San192C-6
Hide quick links:
Advertisement
Table of Contents
