Siemens SINUMERIK 828D Commissioning Manual page 1150
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Operating manual (926 pages) ,
- Programming manual (822 pages)
Table of Contents
Advertisement
Animated elements
C.3 XML commands
<!--Definition of an animation-->
<SceneKey name='BoringAnimation' masterRotationSpeed="-64.0"
maxRotAngle="45.0" begin-Time='0.110 endTime='0.118 view='camiso'
speedMaster='boringtool' Type="VIEW_3D_TURN_CYL">
Description
<SceneKey name='BoringAnimation'
masterRotationSpeed="-64.0"
maxRotAngle="45.0"
beginTime='0.110
endTime='0.118'
view='camiso'
speedMaster='boringtool'
type="VIEW_3D_TURN_CYL">
<!-- Elements -->
<Element name='1' time='0.110' feed='rapid' dwell='2'/>
<Element name='2' time='0.112' feed='rapid'/>
<Element name='3' time='0.114' feed='rapid'/>
<Element name='4' time='0.116' feed='plane'/>
<Element name='5' time='0.118' feed='plane'/>
Description
<Element name='1'
time='0.110'
feed='rapid'
dwell='2'/>
220
Name of the animation
Direction of rotation and rotation speed of the
tool.
The setting is optional.
To avoid aliasing effects (tool seems to be turn‐
ing in the wrong direction). The value is usually
a fourth of the symmetry of the tool.
The setting is optional.
Start time of the animation on the time sensor
End time of the animation on the time sensor
Camera to be used for the animation
Name of the tool for the animation
View type defines the view (see Section View
type (Page 222))
Specifies that it is the first element of the ani‐
mation.
Time of the first element on the time sensor
Traversing speed of the element
plane = machining feedrate
rapid = rapid traverse
reduced = reduced speed, slower than "plane"
Pause in the traversing motion of the anima‐
tion. A rotating tool continues to rotate.
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
- Quick Links:
- Cnc Commissioning
Hide quick links:
Advertisement
Chapters
Table of Contents
