Table of Contents
Advertisement
Removing the Instrument Cover
Refitting the Instrument Cover
Figure 4-3 for the position of the feet.
2. Remove the carrying handles from the case by removing 2 screws
from each side of the case. Both sides have the same fixings.
Figure 4-2. Removing the Carrying Handles
3. Remove the two screws securing the cover to the chassis,
Figure 4-3 shows their position.
Figure 4-3. Rear Panel View Showing Cover Fixing Screws
4. Slide the cover about 10 mm back from the front panel.
chassis, and lifting the cover up.
1. Refitting the instrument cover is the reverse procedure of removal.
COVER FIXING SCREWS
Disassembly and Reassembly 4.5
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
