Table of Contents
Advertisement
Table 3. IBM Supervisor-4 Module LEDs (continued)
LED
ACT
Link
USB3
Slot0
IBM Supervisor-1E Module
The Supervisor-1E Module is designed specifically for the SAN768C-6. This supervisor module delivers
the latest advanced switching technology and resources to support the 18 slot chassis.
This supervisor module supports the following features:
• Nondisruptive software upgrades
• Stateful process restart and failover
• Fully redundant operation
16 IBM Storage Networking SAN192C-6, SAN384C-6 and SAN768C-6: SAN192C-6, SAN384C-6 and
SAN768C-6 Installation, Service, and User Guide
Status
Amber
Off
Green
Off
Green
Amber
Off
Green
Red
Off
Green
Red
Off
Description
The mgmt0 interface is
administratively active and the
supervisor is in the HA standby
state.
The mgmt0 interface is
uninitialized. No signal is
detected.
Frames are being transmitted or
received by the interface.
There is no activity on the
interface.
The management port link is
operational.
The management port link has
been disabled by the software.
No link signal received.
The flash device is mounted.
The device is a valid device type,
but failed to be mounted. This
can be due to an invalid file
system format.
The flash device is not mounted
and can be safely removed.
The flash device is mounted.
The device is a valid device type,
but failed to be mounted. This
can be due to an invalid file
system format.
The flash device is not mounted
and can be safely removed.
Advertisement
Table of Contents
