Table of Contents
Advertisement
Table 5. IBM Supervisor-1 Module LEDs (continued)
LED
Active
Power Management
MGMT Ethernet
ACT
Link
USB1
Status
Green
Amber
Green
Amber
Green
Amber
Off
Green
Off
Green
Amber
Flashing amber
Off
Green
Red
Off
Chapter 1. Introducing the IBM c-type SAN Directors 23
Description
The supervisor is operational and
in HA active state.
The supervisor module is in HA
standby state.
There is sufficient power
available for all installed
modules.
There is insufficient power for all
installed modules.
The mgmt0 interface is
administratively active and the
supervisor is in HA active state.
The mgmt0 interface is
administratively active and the
supervisor is in the HA standby
state.
The mgmt0 interface is
uninitialized. No signal is
detected.
Frames are being transmitted or
received by the interface.
There is no activity on the
interface.
The management port link is
operational.
The management port link has
been disabled by software.
The management port has been
disabled by a hardware fault.
No link signal received.
The flash device is mounted.
The device is a valid device type,
but failed to be mounted. This
can be due to an invalid file
system format.
The flash device is not mounted
and can be safely removed.
Advertisement
Table of Contents
