Table of Contents
Advertisement
Remove the magnetic panel.
1.
Take out the activated charcoal filter.
2.
Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
LED lights
Defective LED lights must only be replaced by the
manufacturer, their customer service department or a licensed
technician (electrician).
Malfunction table
Fault
The appliance does not work
The lighting is not working
F is lit permanently.
--------
Possible cause
The plug is not plugged into the mains
Power cut
The fuse is faulty
The LED lights are defective
The metal grease filter is saturated.
Fitting the activated charcoal filter (only in
circulating-air mode)
Take the new activated charcoal filter out of its packaging
1.
and insert it in the air recirculation module.
Fit the panel such that it is held firmly in place by the
2.
magnets.
Solution
Connect the appliance to the power
supply
Check whether other kitchen appliances
are working
Check in the fuse box to make sure that
the fuse for the appliance is in working
order
Call the after-sales service
Clean the metal grease filter; see sec-
tion Cleaning and maintenance.
9
Advertisement
Table of Contents
