Page 2
Please read this manual before using the product! Dear Customer, We'd like you to make the best use of our product, which has been manufactured in modern facilities with care and meticulous quality controls. Thus, we advice you to read the entire user manual before you use the product. In case the product changes hands, do not forget to hand the guide to its new owner along with the product.
Table of Contents 1. Safety and environment instructions 3 4 Preparation 1.1. General safety..... . . 3 4.1. What to do for energy saving ... 16 1.1.1 HC warning .
Safety and environment instructions This section provides the safety 1.1. General safety instructions necessary to prevent the risk This product should not be used by • of injury and material damage. Failure to persons with physical, sensory and observe these instructions will invalidate mental disabilities, without sufficient all types of product warranty.
Safety and environment instructions Do not use steam or steamed cleaning Do not step or lean on the door, • • materials for cleaning the refrigerator drawers and similar parts of the and melting the ice inside. Steam may refrigerator. This will cause the product contact the electrified areas and cause to fall down and cause damage to the short circuit or electric shock!
Safety and environment instructions Do not install on the hot water inlet. This product has been manufactured • with high quality parts and materials Take precautions against of the risk of which can be reused and are suitable freezing of the hoses. Water temperature for recycling.
Refrigerator *Optional: Figures in this user guide are schematic and may not be exactly match your product. If your product does not comprise the relevant parts, the information pertains to other models. Refrigerator / User Guide 7 / 37 EN...
Installation 3.1. Right place for installation 3.2. Attaching the plastic wedges Use the plastic wedges in the provided with Contact the Authorized Service for the product's the product to provide sufficient space for air installation. To ready the product for installation, circulation between the product and the wall.
Installation 3.3. Adjusting the stands If the product is not in balanced position, adjust the front adjustable stands by rotating right or left. adjusting nut fixing nut fixing nut adjusting nut 3.4. Power connection WARNING: Do not use extension or multi sockets in power connection.
Installation 3.5. Water connection (Optional) WARNING: Unplug the product and the water pump (if available) during connection. The product’s water mains, filter and carboy connections must be rendered by authorizer service. The product can be connected to a carboy or directly to the water mains, depending on the model.
Installation 3.6. Connecting water 3.7. Connecting to water mains hose to the product (Optional) To connect the water hose to the product, To use the product by connecting to the cold water follow the instructions below. mains, a standard 1/2” valve connector must be 1.
Installation 4. Attach the connector into the faucet adaptor 2. Connect the other end of the water hose to and tighten by hand / tool. the water pump by pushing the hose into the pump’s hose inlet. 5. To avoid damaging, shifting or accidentally 3.
Installation 3.9.1.Fixing external filter on the wall (Optional) WARNING: Do not fix the filter on the product. Check to see the following parts are supplied with your product’s model: 4. Attach the water hose extending from the top of the filter to the product’s water connection adaptor, (see 3.6.) 1.
Installation 3.9.2.Internal filter 1. “Ice Off” indicator must be active while installing the filter. Switch the ON-OFF The internal filter provided with the product is not indicator using the “Ice” button on the screen. installed upon delivery; please follow the instructions below to install the filter.
Page 16
Installation 3. Remove the water filter by-pass cover by pulling. A few drops of water may flow out after removing the cover; this is normal. 4. Place the water filter cover into the mechanism and push to lock in place. 5.
Preparation 4.1. What to do for energy saving • The baskets/drawers that are provided with the mehmet chill compartment must always be in use for Connecting the product to electronic low energy consumption and for better storage energy-saving systems is harmful, as it conditions.
Using the product 5.1. Indicator panel Indicator panels may vary depending on the model of your product. Audial and visual functions of the indicator panel will assist in using the refrigerator. 1. Cooler compartment indicator 2. Error status indicator 3. Temperature indicator 4.
Page 19
Using the product 1. Cooler compartment indicator Push the Vacation button ( ) again to cancel The cooler compartment light will turn on when this function. adjusting the cooler compartment temperature. 5. Temperature adjustment button 2. Error status indicator Respective compartment's temperature varies in This sensor will activate if the refrigerator is not -24°C..
Page 20
Using the product 7.1 7.2 1. Economic use 2- High temperature / fault alert 3. Energy saving function (display off) 4- Rapid cooling 5- Vacation function 6- Cooler compartment temperature setting 7. Energy saving (display off) /Alarm off 8- Keypad lock 9- Eco-fuzzy 10- Freezer compartment temperature setting 11- Rapid freezing...
Page 21
Using the product 1. Economic use after 1 hour, unless cancelled by the user. Too This sign will light up when the freezer cool a large amount of fresh food, press the rapid compartment is set to -18°C', the most cool button before placing the food in the cooler economical setting.
Page 22
Using the product 8. Keypad lock Press the display off button, simultaneously for 3 seconds. The keypad lock sign will light up and the keypad lock will be activated; the buttons will be inactive when the Keypad lock is activated. Press the Display off button again simultaneously for 3 seconds.
Page 23
7.1 7.2 Using the product 11.2 11.1 1. Freezer compartment temperature setting 2. Economy mode 3. Energy saving function (display off) 4. Power failure/High temperature / error warning indicator 5. Cooler compartment temperature setting 6. Rapid cooling 7. Vacation function 8.
Page 24
Using the product 1. Freezer compartment temperature setting 6. Rapid cooling For rapid cooling , press the button; this will Pressing the button ( ) will enable the freezer compartment temperature to be set at -18,-19,- activate the rapid cooling indicator ( 20,-21 ,-22,-23,-24,-18...
Using the product 5.2. Humidity controlled crisper display will go off and the display will enter the energy saving mode. When you press the Display off button (FreSHelf) again and when the( ) function is lit, all (This feature is optional) the other icons of the display will be lit and the display Humidity rates of the vegetables and fruit are will exit the energy saving mode.
Using the product 5.3. Activating water filter change warning (For products connected to the mains water line and equipped with filter) Water filter change warning is activated as follows: Automatic filter usage time calculation is not enabled ex factory. It must be enabled in products equipped with a filter. The S4 display board we use in the refrigerator has a nine-key system.
Page 27
Using the product Press twice Press once “Upon seeing PS 0 screen, de-energise the refrigerator and energise it again. This way, the filter counter will be activated. The filter warning LED will be active on the display in 130 days. After replacing the filter with a new one, press the Key Lock button for 3 seconds to make the filter counter to count down from 130 days.
Using the product 5.5. Filling the fountain water tank 5.4. Using the water fountain Open the water tank’s lid, as shown in the figure. (for certain models) Fill in pure and clean drinking water. Close the lid. The first few glasses of water taken from the fountain will normally be warm.
Using the product 5.6. Cleaning the water tank Remove the water filling reservoir inside the door shelf. Detach by holding both sides of the door shelf. Hold both sides of the water tank and remove at 45° angle. Remove and clean the water tank lid. Do not fill the water tank with fruit juice, fizzy beverages, alcoholic beverages or any other liquids incompatible for use in...
Using the product 5.7. Taking ice / water • The water may be cloudy during first use of the filter; do not consume the first 10 glasses (Optional) of water. To take water ( ) / ice cube ( ) / fragmented • You must wait approximately 12 hours to get ice ( ), use the display to select the respective...
Using the product 5.9. Zero degree compartment WARNING: Do not sit, hang or place heavy objects on the minibar cover. This (Optional) may damage the product or cause you to Use this compartment to keep delicatessen be injured. at lower temperatures or meat products for immediate consumption.
Using the product 5.16. Ice-maker 5.15. Icematic and ice storage box (Optional) (Optional) Ice maker is located on the upper section of the Fill the icematic with water and put in place. freezer cover. The ice will be ready after approximately two hours.
Page 33
Using the product If you have difficulty in refitting the reservoir, turn the rotary gear 90° and reinstall it as shown in the figure3. Any sound you hear when the ice drops into the reservoir is a part of normal operation. When the ice dispenser does not work properly If you do not remove ice cubes for a long time, they...
Using the product Ice type cannot be changed on the display when the 5.18. Recommendations for ice trigger is pressed to obtain ice. Release the trigger, storing frozen foods change the ice type on the display and obtain ice The compartment must be set to at least -18°C. again.
Using the product 5.20. Placing the food Freezer Various frozen goods including compartment meat, fish, ice cream, shelves vegetables etc. Cooler Food items inside pots, capped compartment plate and capped cases, eggs shelves (in capped case) Cooler Small and packed food or compartment beverages door shelves...
Maintenance and Cleaning • Do not use sharp, abrasive tools, Cleaning the product regularly will prolong its soap, household cleaning agents, service life. detergents, kerosene, fuel oil, WARNING: Disconnect the power varnish etc. to prevent removal and before cleaning the refrigerator. deformation of the prints on the plastic part.
Troubleshooting • The product’s operating performance may Check this list before contacting the service. vary depending on the ambient temperature Doing so will save you time and money. This list variations. This is normal and not a malfunction. includes frequent complaints that are not related to faulty workmanship or materials.
Page 38
Troubleshooting • The food items kept in cooler compartment Hot or humid weather will increase icing and drawers are frozen. condensation. This is normal and not a malfunction. • The doors were opened frequently or kept open • The cooler compartment temperature is set for long periods.