Related Manuals for Siemens WM14U460IN
Summary of Contents for Siemens WM14U460IN
- Page 1 Washing machine WM14U460IN siemens-home.bsh-group.com/welcome Register your product online...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Cleaning and maintenance . . . 39 Intended use Machine housing/control panel ..39 Drum ......39 This appliance is intended for private ■... -
Page 5: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 6: Installation
Safety instructions The mains voltage on your Warning ■ power socket must match Risk of poisoning! the rated voltage specified Detergents and care products on the appliance may result in poisoning if (identification plate). The consumed. connected loads and the If accidentally swallowed, seek required fuse protection are medical advice. - Page 7 Safety instructions If you take hold of any of the Warning ■ appliance's protruding parts Risk of electric shock/fire/ (e.g. the appliance door) in material damage/damage to order to lift or move it, these the appliance! parts may break off and If the appliance's mains cable is cause injury.
-
Page 8: Operation
Safety instructions The appliance is secured for Caution! ■ transportation by transport Material damage/damage to locking devices. If the the appliance transport locking devices are If the water pressure is too ■ not removed before the high or too low, the appliance is operated, this appliance may not be able to may result in damage to the... - Page 9 Safety instructions Warning Warning Risk of poisoning! Eye/skin irritation! Poisonous fumes may be given Detergent and care products off by cleaning agents that may spray out if the detergent contain solvents, e.g. cleaning drawer is opened while the solvent. appliance is in operation. Do not use cleaning agents that Rinse eyes/skin thoroughly if contain solvents.
-
Page 10: Cleaning/Maintenance
Safety instructions Cleaning/Maintenance Warning Risk of poisoning! Warning Poisonous fumes may be given Risk of death! off by cleaning agents that The appliance is powered by contain solvents, e.g. cleaning electricity. There is a risk of solvent. electric shock if you come into Do not use cleaning agents that contact with live components. -
Page 11: Environmental Protection
E-waste (Management) Rules immediately. 2016. Do’s Please visit our website ■ http://www.siemens-home.com/in/ Preserve.html to find out more details regarding ewaste disposal Consult the authorized service ■ center as to whether the Electronic Equipment can be repaired or not,... -
Page 12: Tips On Economical Use
Environmental protection Don’ts Information about the energy ■ Don’t dump the discarded Electronic consumption ■ Equipment in the open or in any land The display provides information fill site, as this will result in about the relative energy contamination of the soil and the consumption in the selected ground water program. -
Page 13: Positioning And Connecting
Positioning and connecting Mains lead Positioning and Bag: connecting Installation and operating ■ instructions S tandard accessories Customer Service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the appliance for transport Note:... -
Page 14: Safety Instructions
Positioning and connecting Safety instructions Installation surface The washing machine must be Warning Note: aligned in a stable manner so that it Risk of injury! does not move around. The washing machine is very heavy. ■ The installation surface must be firm Be careful when lifting/transporting ■... -
Page 15: Removing The Transport Locks
Positioning and connecting Removing the transport locks Unscrew and remove all four transport brace screws. Remove the sleeves. To do this, Caution! remove the mains cable from the Damage to the appliance holders. The machine is secured for ■ transportation using transport locks. If the transport locks are not removed, the machine may become damaged when it is operated. -
Page 16: Hose And Cable Lengths
Positioning and connecting Undo and remove the screws on the If the supply hose is too short for Tip: horizontal transport strut. your connection, you can order an extension from the after-sales service. Water inlet Warning Risk of death! There is a risk of electric shock if you touch live components. -
Page 17: Water Outlet
Positioning and connecting Water outlet Connection Connect the water supply hose to Caution! the water tap (¾" = 26.4 mm) and to Water damage the appliance: When water is being pumped away, the – Model: Standard outlet hose is under water pressure and may slip out of the wash basin or connection point. -
Page 18: Levelling
Positioning and connecting Secure the outlet hose so that it Levelling cannot slip out. Level the appliance using a spirit level. Elbow available from after-sales service: Incorrect levelling may result in intense Individual part number 00655300 noise, vibrations and "wandering". Loosen the lock nuts using a wrench, by turning it in a clockwise direction. -
Page 19: Electrical Connection
Positioning and connecting Electrical connection Grounding Instructions Warning Warning Danger of death! Danger of death! Improper connection of the ground may There is a risk of electric shock if you result in electric shock. Have the touch live components. appliance checked by a qualified Never touch or hold the mains plug ■... -
Page 20: Before Washing For The First Time
Positioning and connecting Before washing for the first Transportation time e.g. when moving home The washing machine was thoroughly Preparatory work: tested before leaving the factory. To Turn off the water tap. remove any water that may be left over Reduce the water pressure in the from the test, run the first wash cycle supply hose. - Page 21 Positioning and connecting Before switching on the appliance again: Notes The support struts must be ■ removed. The transport locks must be ■ removed. ~ "Removing the transport locks" on page 15 To prevent unused detergent from ■ flowing straight into the drain during the next wash: Pour approx.
-
Page 22: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e 9S Open the door Detergent dispenser 9T Close the door Control panel... -
Page 23: Control Panel
Getting to know the appliance Control panel You can find possible programme default settings and additional programme settings in the overview; these differ depending on the model. ( Programme default settings can be changed. Overview of all programme default settings ~ Page 31 0 additional programme settings can be selected. -
Page 24: Display Panel
Getting to know the appliance Display panel In the table you can find possible settings and information in the display panel; these differ depending on the model. Settings for the selected programme Temperature in °C Temperature Ž - 90* - - - -, 0 - 1400* Spin speed in rpm Maximum spin speed or - - - - (Rinse stop = without final spin, (revolutions per minute) washing remains in the water after the last rinse) -
Page 25: Laundry
Laundry Soiling ■ Laundry Wash laundry with the same level of soiling together. P repare the laundry Some examples of soiling levels can L a u n d r y be found in the chapter Caution! – Light: Do not need to pretreat, Damage to the appliance/fabrics select the G speed setting if necessary. -
Page 26: Dyeing/Bleaching
Detergent Dyeing/bleaching Saving energy and detergent Dye should only be used in normal For light and normal soiling, you can household quantities. Salt may damage save energy (lower washing stainless steel. Always follow the dye temperature) and detergent. manufacturer's instructions. Saving Soiling/note Do not use the washing machine to... -
Page 27: Overview Of Programmes
Overview of programmes Overview of programmes O v e r v i e w o f p r o g r a m m e s Programme/Type of washing Options/Information Max. load * as kg Name of the programme depending on the model and the pro- Brief explanation of the programme and for which fabrics it is gramme suitable. - Page 28 Overview of programmes Programme/Type of washing Options/Information Delicates/Silk Y Max. 2.0 kg For delicate, washable textiles, e.g. made of silk, satin, synthetic Ž - 40 °C fibres or blended fabrics (e.g. silk blouses, silk scarf). - - - -, 0 - 800 rpm Use a detergent suitable for appliance-washing delicates Note: G speed, ¦...
- Page 29 Overview of programmes Programme/Type of washing Options/Information k Drum Clean Max. 0.0 kg Special program for drum hygiene or fluff removal. Do not load Ž, 40°C, 90 °C any laundry. 1200 rpm 90°C = antibacterial program. 40°C = antibacterial program, special drum cleaning detergent can be used.
- Page 30 Overview of programmes Programme/Type of washing Options/Information " Hygiene Max. 6.5 kg Hard-wearing fabrics made of cotton or linen. Ž - 60 °C Note: Particularly suited to washing items that need to be hy- - - - -, 400 - 1400 rpm gienically clean and especially kind to sensitive skin thanks to G speed, ¦...
-
Page 31: Programme Default Settings
Programme default settings Finish in time Programme default (û Finish in) settings Before starting the program, you can preselect the program end ("Ready in" You can find possible N ote: P r o g r a m m e d e f a u l t s e t t i n g s programme default settings in the time) in hourly increments (h = hour) up to a maximum of 24 hours. -
Page 32: Additional Programme Settings32
Additional programme settings The length of the program is Note: Additional programme automatically adjusted when the program is running. settings Certain factors can affect the program length, e.g.: You can find possible additional Note: Program settings, A d d i t i o n a l p r o g r a m m e s e t t i n g s programme settings in the overview;... -
Page 33: Less Iron
Operating the appliance Less iron Operating the (Ø Less iron) appliance Reduces creasing thanks to a special spin sequence followed by fluffing and Install and connect washing N ote: O p e r a t i n g t h e a p p l i a n c e reduced spin speed. -
Page 34: Change The Programme Default Settings
Operating the appliance Change the programme Placing laundry into the drum default settings Warning You can use the default settings or Danger of death! change them. Items of laundry pretreated with cleaning agents that contain solvents, To do this, repeatedly select the e.g. -
Page 35: Measure And Add Detergent And Care Products
Operating the appliance Measure and add detergent Dispenser I Clothing disinfectant. and care products (Disinfectant additional programme setting or Caution! Disinfectant programme is selected only.) Damage to the appliance! Detergents and agents for the Softener. Do not exceed Dispenser i pretreatment of laundry (e.g. -
Page 36: Childproof Lock
Operating the appliance Childproof lock Adding/removing laundry (w 3 sec.) Following the start of the program, you can add or remove laundry as required. You can lock the washing machine to prevent the functions you have set from Press the Start/Reload button to do this. being changed inadvertently. -
Page 37: Cancel The Programme
Operating the appliance Cancel the programme Removing laundry/switching off the appliance For programs at high temperature: Press the Start/Reload button. Open the washing machine door To cool down laundry: Select Rinse and remove the laundry. Turn the programme selector to Press the Start/Reload button. -
Page 38: Setting The Signal
Setting the signal Changing the volume Setting the signal Use the û Finish in button to change the following settings at the Y ou can change the following settings: corresponding program selector S e t t i n g t h e s i g n a l The volume for the information positions: ■... -
Page 39: Cleaning And Maintenance
Cleaning and maintenance Descaling Cleaning and Descaling should not be necessary if maintenance the detergent is measured out correctly. However, if it is required, follow the Warning manufacturer's instructions for the C l e a n i n g a n d m a i n t e n a n c e Danger of death! descaling agent. -
Page 40: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Place the service flap back on, lock After the water has cooled down: Turn off the water tap so that no it into place, and close it. more water can flow in and has to be drained via the drain pump. Switch off the appliance. -
Page 41: Filter In The Water Supply Is Blocked
Faults and what to do about them Filter in the water supply is Faults and what to do blocked about them First, reduce the water pressure in the E mergency release supply hose: F a u l t s a n d w h a t t o d o a b o u t t h e m Turn off the tap. -
Page 42: Information On The Display Panel
Faults and what to do about them Information on the display panel Display Cause/Remedy Flashes fast + warning signal: The door was opened and the water level is Õ ■ too high. Close the door, continue the programme with Start/Reload button or select Spin 0 programme. - Page 43 Faults and what to do about them Faults Cause/Remedy The water is not draining. Is “- - - -” selected (Rinse Stop = no final drain)? ■ Clean the drain pump ~ Page 39 ■ Clean the drain pipe and/or the drain hose. ■...
- Page 44 Faults and what to do about them Faults Cause/Remedy There is detergent resi- Some phosphate-free detergents contain water-insoluble residue. ■ due on the laundry. Select Rinse q or brush the laundry after washing. ■ The Õ symbol lights up Door is locked due to safety reasons (water level and/or temperature are ■...
-
Page 45: After-Sales Service
After-sales service After-sales service I f you cannot correct the fault yourself A f t e r - s a l e s s e r v i c e ~ "Faults and what to do about them" on page 41 please contact our after- sales service. -
Page 46: Consumption Values Table
0,25 kWh 37 l Wool/Gentle hand wash Í 30 °C 2 kg 0,22 kWh 41 l Programme Approximate information on the residual moisture*** WM14U460IN Max. 1400 rpm 48 % Cottons v Synthetics Ó 40 % Delicates/Silk Y 30 % Wool/Gentle hand wash Í... -
Page 47: Technical Data
Technical data Technical data D imensions: T e c h n i c a l d a t a 848 mm x 598 mm x 590 mm (height x width x depth) Weight: 79 kg Mains connection: Nominal voltage 220-240V, 50 Hz Minimum installation protection (c) 10 A Nominal power 1900-2300 W... - Page 48 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001365557* 9001365557 (0010)