Related Manuals for Siemens WM14U940 Series
Summary of Contents for Siemens WM14U940 Series
- Page 1 Washing machine WM14U940... siemens-home.bsh-group.com/welcome Register your product online...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Adding more laundry or removing Intended use. -
Page 4: Intended Use
Intended use Descaling..... 48 Intended use Detergent drawer and housing ..48 Drain pump is blocked ..49 This appliance is intended for private The drain hose at the siphon is ■... -
Page 5: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 6: Installation
Safety instructions Warning Installation Risk of suffocation! Warning If allowed to play with the Risk of electric shock/fire/ packaging/plastic film or material damage/damage to packing components, children the appliance! may become caught in these or If the appliance is not installed pull them over their heads and properly, this may lead to a suffocate. - Page 7 Safety instructions The mains plug must be Connect the appliance directly ■ freely accessible at all times. to an earthed socket that has If this is not possible, in been correctly installed. Do not order to comply with the use extension cords, power relevant safety regulations, a strips or multi-way couplers.
-
Page 8: Operation
Safety instructions The appliance has sharp The use of hoses supplied ■ ■ edges on which you could by other brands to connect cut your hands. to the water supply may Do not take hold of the result in material damage or appliance by its sharp damage to the appliance. - Page 9 Safety instructions Warning Warning Risk of poisoning! Irritation of the respiratory tract/eyes! Poisonous fumes may be given off by cleaning agents that This appliance runs contain solvents, e.g. cleaning programmes that use active solvent. oxygen. Active oxygen can Do not use cleaning agents that irritate the mucosa and cause contain solvents.
-
Page 10: Cleaning/Maintenance
Safety instructions Never take hold of the mains Caution! ■ plug with wet hands. Material damage/damage to When removing the mains the appliance ■ plug from the socket, always If the amount of laundry in ■ take hold of the plug itself the appliance exceeds its and never the mains cable, maximum load capacity, it... -
Page 11: Environmental Protection
Environmental protection Warning Environmental Risk of injury/material protection damage/damage to the appliance! P ackaging/used appliance The use of spare parts and E n v i r o n m e n t a l p r o t e c t i o n accessories supplied by other Dispose of packaging in an environmentally-responsible... -
Page 12: Positioning And Connecting
Positioning and connecting Energy-saving mode: If the ■ Positioning and appliance is not operated for a prolonged period (approx. 5 connecting minutes), the Touch-Display lighting goes out before the programme S tandard accessories starts and when the programme has P o s i t i o n i n g a n d c o n n e c t i n g ended to save energy, I flashes. -
Page 13: Safety Instructions
Positioning and connecting When the appliance is lifted by its Mains lead ■ protruding parts (e.g. the appliance Bag: door), the components may break Installation and operating ■ off and cause injuries. instructions Do not lift the appliance by Customer Service location protruding parts. -
Page 14: Installation On A Base Or A Wooden Joist Floor
Positioning and connecting Installation on a base or a Removing the transport locks wooden joist floor Caution! Damage to the appliance Caution! The appliance is secured for Damage to the appliance ■ transportation using transport locks. The appliance may "wander" and tip/ If the transport locks are not topple from the base when spinning. -
Page 15: Hose And Cable Lengths
Positioning and connecting Unscrew and remove all four Lock the covers firmly in place by transport brace screws. applying pressure to the snap-in hooks. a) Remove the mains cable from the Hose and cable lengths holders. Connection on left side b) Remove the sleeves. -
Page 16: Water Inlet
Positioning and connecting Do not use a used supply hose. Only ■ use the supply hose supplied or one Connection on right side that was purchased from an authorised specialist retailer. Do not bend, squash, modify or cut ■ through the water supply hose (otherwise its strength is no longer guaranteed). -
Page 17: Water Outlet
Positioning and connecting – Model: Aqua-Stop Caution! Damage to the appliance/fabrics If the end of the drain hose is immersed in the drained water, water may be sucked back into the appliance and may damage the appliance/fabrics. Make sure that: The plug does not block drainage ■... -
Page 18: Alignment
Positioning and connecting Check the alignment of the Drainage into a plastic pipe with ■ appliance with a spirit level, and rubber bushing or into a drainage adjust it if necessary. Change the height by turning the appliance feet. All four appliance feet must stand firmly on the ground. -
Page 19: Before Washing For The First Time
Positioning and connecting Observe the following information and Insert mains plug. ensure that: Turn the water tap on. Press the " button till the indicator Notes lamp lights up, release the button. The mains voltage and voltage The appliance is switched on. ■... - Page 20 Positioning and connecting b) Clip the mains cable securely in Installing the transport locks: Remove the covers and keep them the holders. in a safe place. Use a screwdriver if Note: necessary. c) Insert and tighten the screws. Before switching on the appliance again: Insert all four sleeves.
-
Page 21: Get To Know Your Appliance
Get to know your appliance Get to know your appliance Appliance G e t t o k n o w y o u r a p p l i a n c e Detergent drawer Control panel/touch display Loading door Service flap... -
Page 22: Control Panel
Get to know your appliance Control panel ( Touch display Touch lightly to select settings. 0 Door opening Press to open the door. You will only be able to open the door if the appliance is switched on and the programme progress allows it. 8 Main switch Press to switch the appliance on or off (standby). - Page 23 Get to know your appliance Swiping Setting has been selected Menu After switching on the appliance: Swipe your finger over the touch display to scroll through a list, either from left to right or top to bottom. What the symbols mean Setting is not selected ( Programmes or favourites 0 Time ~ Page 33...
-
Page 24: Operating The Appliance
Operating the appliance Touch the required programme. Operating the appliance S witching on the appliance/ O p e r a t i n g t h e a p p l i a n c e selecting a programme The appliance must be correctly Note: installed and connected. -
Page 25: Programme Settings
Operating the appliance Load the laundry unfolded into the Programme settings drum. Once you have selected a programme, you will be shown preset programme settings. Preset programme settings are recommendations for the programme you have selected and will vary. You can find further programme settings by touching ˜... - Page 26 Operating the appliance Touch the programme setting to p Temperature return to the programme settings Before and after the programme starts, overview. you can change the set temperature depending on how far through the programme the appliance is. The maximum temperature that can be set depends on the programme that has been selected.
-
Page 27: Programme Features
Operating the appliance z Water Plus ã AutoStains Increased water level for gentler Adjusts the washing temperature, drum treatment of the laundry. movement and soaking time to the specific type of stain. Touch z Water Plus to activate or deactivate it. Hot or cold water, gentle or intensive washing and long or short soaking ensure that the wash programme... - Page 28 Operating the appliance B Delayed start Activating Flex start Touch B. Before the programme starts, you can Slide your finger along the bar until set the time at which you want the the required time period is shown in programme to finish. hours or as a clock time.
-
Page 29: Options
Operating the appliance Touch I. Notes Open the door. Each programme can only be saved ■ Add more laundry or remove once. laundry. You can save up to seven favourite ■ Close the door. programmes. Touch I. Calling up Touch }. Switch on the appliance. -
Page 30: Start The Programme
Operating the appliance Touch or swipe your finger along the sensoFresh î bar until the required value is There are two intensity settings for the displayed. active oxygen treatment. The changes are applied Note: immediately and do not need to be Active oxygen intensity confirmed. -
Page 31: Adding More Laundry Or Removing Laundry
Appliance menu Adding more laundry or Programme end removing laundry Laundry is ready. will appear on the touch display If the programme has already started, you will still be able to load more Press Ï to open the door. laundry or remove some from the drum. Remove the laundry. -
Page 32: Childproof Lock W
Appliance menu Childproof lock w Audible signal settings ü You can lock the control panel to Signal tone after the end of the prevent settings from being changed programme. inadvertently. You can do the following to the signal You can do the following to the tone: Deactivate it childproof lock:... - Page 33 Appliance menu Touch the appliance setting. Touch the hour side of the time display and swipe your finger along the bar until the correct hour is shown. Touch or swipe your finger along the bar until the required value is displayed.
- Page 34 Appliance menu Touch the required language. Drum clean reminder Your appliance can issue you with regular reminders to run the cleaning programme. Touch Drum clean reminder to activate or deactivate the reminder function. Brightness You can set the brightness of the touch display.
-
Page 35: Home Connect
Home Connect Home Connect services are not Factory settings available in every country. The You can reset all your appliance availability of the Home Connect settings. function depends on the availability of Home Connect services in your country. Touch Factory settings. You can find information on this at Touch Reset. -
Page 36: Connecting To The Home Network And The Home Connect App
Home Connect Press à . Confirm the message in the display. Press Home Connect . The appliance now attempts to connect Press Continue. to your home network. | flashes in the You are now in the Home Connect display. menu. Press §... - Page 37 Home Connect Press Connect manually. Confirm the message in the display. The appliance now sets up its own Wi-Fi If the appliance has connected to your network with the name (SSID) Home home network successfully, Your home Connect. appliance is connected to your home network.
-
Page 38: Energy Management
Home Connect Energy management Status You can connect your appliance to your View the status of your connection to smart energy system (Energy manager). the home network, to the app and to the energy manager (depending on the Once you have connected your appliance features). -
Page 39: Resetting Your Network Settings
A detailed RED Declaration of The software update may take Note: Conformity can be found online at several minutes. Do not switch the www.siemens-home.bsh-group.com appliance off while updates are being among the additional documents on the installed. product page for your appliance. -
Page 40: Laundry
Laundry Sorting laundry Laundry Sort your laundry according to the care P rotecting your laundry and instructions and manufacturer's L a u n d r y appliance information on the care labels, depending on: Caution! Type of fabric/fibre ■ Damage to the appliance/textiles Colour ■... -
Page 41: Starching
Detergent Starching Detergent Laundry should not be treated Note: C orrect selection of detergent with fabric softener. D e t e r g e n t The care label is crucial for selecting Switch on the appliance. the correct detergent, temperature and Select the Rinse programme. -
Page 42: Saving Energy And Detergent
Detergent Saving energy and detergent For light and normal soiling, you can save energy (lower washing temperature) and detergent. Saving Soiling/note Reduced temper- Light ature and deter- No visible dirt or stains. Cloth- gent quantity as ing has taken on some body per the recom- odour, e.g.: mended dosage... -
Page 43: Overview Of Programmes
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of washing Options/Information Name of the programme Max. load* as kg Brief explanation of the programme and for which fabrics it is selectable temperature** as °C suitable. - Page 44 Overview of programmes Programme/Type of washing Options/Information Delicates/Silk Max. load 2 kg For cleaning delicate fabrics, such as silk, satin or viscose. Cold - 40 °C Reduced spinning for optimal textile care. We recommend Off - 800 rpm using a detergent designed for delicates. (, ¦, !, æ, l, z, ç, õ, $, ã...
- Page 45 Overview of programmes Programme/Type of washing Options/Information Duvet Max. load 2.5 kg For gentle cleaning of microfibre blankets, pillows and clothing Cold - 60 °C filled with down or synthetic fibres. Wash larger items individu- 400 - 1200 rpm ally. We recommend using a small dose of a detergent designed for delicates.
- Page 46 Overview of programmes Programme/Type of washing Options/Information Rinse For running separate rinse and spin cycles. Off - 1400 rpm æ, l, z, ç, $ Spin For running a separate spinning cycle. Off - 1400 rpm æ, ç Drain For draining all the remaining water in the washing machine separately, e.g.
-
Page 47: Sensors
Sensors Sensors Cleaning and maintenance U nbalanced load detection S e n s o r s system Warning C l e a n i n g a n d m a i n t e n a n c e Risk of death! The automatic unbalanced load There is a risk of electric shock if touch... -
Page 48: Descaling
Cleaning and maintenance Descaling Clean the detergent dispenser tray and insert with water and a brush, Descaling should not be necessary if and dry it. Clean the inside of the the detergent is measured out correctly. housing as well. However, if it is required, follow the manufacturer's instructions for the descaling agent. -
Page 49: Drain Pump Is Blocked
Cleaning and maintenance Drain pump is blocked Carefully unscrew the pump cover; residual water may leak out. Clean the interior, pump cover Turn the water tap off to prevent Note: thread and pump housing. The more water from flowing in and to impeller in the drain pump must be ensure that it is drained via the pump. -
Page 50: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance The drain hose at the siphon Clean the filters: is blocked Disconnect the hose from the rear of the appliance. Press the " button. Pull out the mains plug. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out. -
Page 51: Faults And What To Do About Them
Faults and what to do about them Open the service flap. Faults and what to do about them E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m E.g. -
Page 52: Faults And What To Do About Them
Faults and what to do about them Faults and what to do about them Faults Cause/Remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ appliance. Tighten the screw fitting on the supply hose. ■ The appliance is not filling Programme does not start? ■... - Page 53 Faults and what to do about them Faults Cause/Remedy The spin result is not sat- Not a fault – the unbalanced load detection system has interrupted the ■ isfactory. spin cycle because the laundry is unevenly distributed. Distribute small and large items of laundry evenly in the drum.
- Page 54 Faults and what to do about them Faults Cause/Remedy The Touch-Display indica- Has there been a power failure? ■ tor lights do not work Have the fuses blown? Reset/replace the fuses. ■ while the appliance is run- If the fault occurs repeatedly, call customer services. ■...
-
Page 55: After-Sales Service
After-sales service After-sales service I f you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e (~ "Faults and what to do about them" on page 51), please contact our after- sales service. -
Page 56: Consumption Values Table
Supplementary sheet for the installation and operating instructions Consumption values table E nergy and water consumption, programme duration and residual moisture for S u p p l e m e n t a r y s h e e t f o r t h e i n s t a l l a t i o n a n d o p e r a t i n g i n s t r u c t i o n s the main washing programme (approximate values) Programme... -
Page 57: Technical Data
Technical data Technical data D imensions: T e c h n i c a l d a t a 848 mm x 598 mm x 622 mm (height x width x depth) Weight: 83 kg Mains connection: Nominal voltage 220-240V, 50 Hz Minimum installation protection (c)10 Nominal power 1900-2300 W Water pressure:... -
Page 58: Aqua-Stop Warranty
Aqua-Stop warranty Aqua-Stop warranty O nly for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a... - Page 60 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001324987* 9001324987 (9801)