Table of Contents
Related Manuals for Siemens WM14US50NL
Summary of Contents for Siemens WM14US50NL
- Page 1 Washing machine WM14US50NL User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Table of contents 1 Safety..........4 10 Before using for the first time ... 34 1.1 General instructions ....4 10.1 Washing cycle without washing good start ........ 34 1.2 Destination of the device rate ........4 11 Laundry........35 1.3 Restriction of users .. - Page 3 16 Basic Settings ....44 16.1 Overview of the basic settings ........ 44 16.2 Changing basic settings..45 17 Cleaning and maintenance..45 17.1 Tips for maintenance of the unit ........ 45 17.2 Cleaning the drum ....45 17.3 Cleaning the detergent drawer ........
-
Page 4: Safety
NL Safety 1 Safety Observe the following safety instructions. 1.1 General instructions ¡ Read this manual carefully. ¡ Keep the operating instructions and product information for later use or for subsequent owners. ¡ Do not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: ¡... -
Page 5: Safe Installation
Safety NL 1.4 Secure installation Observe the safety regulations when installing the device. WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Only connect and operate the device in accordance with the information on the type plate. ▶ Only connect the device to a mains supply with alternating current via a properly installed earthing socket. - Page 6 NL Safety ▶ If the power cord is too short, contact customer service. ▶ Only use adapters approved by the manufacturer. WARNING ‒ Risk of injury! The high weight of the device can cause injuries when lifted. ▶ Do not lift the device alone. If this appliance is installed incorrectly in a washer-dryer column, the installed appliance may fall down.
-
Page 7: Safer Use
Safety NL If the appliance is moved by protruding parts, such as the loading door, the parts can break off. ▶ Do not move the appliance by protruding parts. CAUTION ‒ Risk of cutting! Sharp edges on the device can lead to cuts if touched. ▶... - Page 8 NL Safety ▶ In the case of discarded appliances, remove the mains plug from the socket, then cut the mains cable and damage the lock of the appliance door so that the appliance door no longer closes. WARNING ‒ Risk of suffocation! Children can inhale or swallow small parts and choke.
-
Page 9: Safe Cleaning And Maintenance
Safety NL CAUTION ‒ Risk of burns! The glass of the appliance door gets hot when washing at high temperatures. ▶ Do not touch the hot appliance door. ▶ Keep children away from the hot appliance door. CAUTION ‒ Risk of burns! The soap gets hot when washing at high temperatures. - Page 10 NL Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use original spare parts and accessories from the manufacturer. WARNING ‒ Risk of poisoning! Toxic fumes can be generated when cleaning agents containing solvents are used.
-
Page 11: Avoiding Material Damage
Avoid material damage NL Make sure that the inner diameter ▶ 2 Material damage of the water tap is at least 17 avoid Make sure that the length of the ▶ thread on the connection to the observe this instruction to avoid water tap is at least 10 mm. -
Page 12: Environmental Protection And Saving
NL Environmental protection and saving Only clean the appliance ▶ Dose the detergent according to the degree of soiling of the laundry → with water and a soft, damp cloth. Page 38. Direct contact with the device ▶ a For a light to normal degree remove all detergent residue, of contamination, a small amount spray mist or residue. -
Page 13: Energy Saving Mode
Set up and connect NL The device has an aqua sensor. LOOK OUT! Objects that remain in the drum and that are not intended for use with the a The aquasensor monitors during device can lead to material and device rinsing controls the turbidity of the damage. -
Page 14: Package Contents
NL Set up and connect 4.2 Package contents After unpacking, check all parts for transport damage and the complete ness of the delivery. WARNING Washing machine Risk of electric shock! Accompanying documents The device contains live parts. Touching live parts is dangerous. Water supply hose cover caps Do not use the appliance without... -
Page 15: Removing Transport Locks
Set up and connect NL LOOK OUT! installation site To demand If the appliance is installed in areas on a wall no snakes with a risk of frost or outdoors, frozen between wall and residual water can damage the device clamping appliance and frozen hoses can man. -
Page 16: Connecting The Device
NL Set up and connect Loosen and remove all bolts of the Install the 4 cover caps. 4 transport locks with a SW13 open-end wrench Push the 4 cover caps down. Pull the mains connection cable out of the holder. 4.5 Connecting the device Connect water supply hose Note Remove the 4 sleeves. -
Page 17: Adjusting The Device
Set up and connect NL Connect the water inlet hose to the Remark: Observe the pumping appliance. heights. The maximum pumping height wears 100 cm. The connection position tie with a hose clamp (24-40 mm) bore gene. Drain in a the water drainage Connect the water inlet hose to the feeding hose with... -
Page 18: Connecting The Appliance Electrically
NL Set up and connect Loosen the lock nuts with a SW17 Tighten the lock nuts against the open-end wrench. housing with an open-end wrench SW17 hand-tight. To adjust the appliance, turn the Hold the appliance foot while appliance feet. Check the horizontal doing so and do not adjust the adjustment of the appliance with a height. -
Page 19: Getting To Know Your Device
Getting to know your device NL 5 Getting to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the picture may differ, e.g. the color and the shape. Transport protections Service valve and pump →... -
Page 20: Detergent Drawer
NL Getting to know your device 5.2 Detergent drawer Manual dosing compartment : dosing container for fabric softener : Detergent dispenser 5.3 Controls You can use the control panel to set all the functions of your device and gain information about the condition of use. Programs →... -
Page 21: Display
Display NL 6 Display The display shows the current setting values, options or instructions. song lyrics. name Description Indication 0:40 Program duration / Approximate expected program time or remaining time of program time remaining. the program 9 kg Recommended load Maximum load amount for the set program in kg. - Page 22 NL Display name Description Indication Centrifuge Program status Program status Rinse hold – – – – Program end Program status Child lock ¡ lights up: the child lock is activated. ¡ flashes: the child lock is activated and the device was operated. →...
- Page 23 Display NL name Description Indication voltage control Flashing: The automatic voltage monitoring system detects impermissible lesson system undervoltage of the voltage. The program pauses. Remark: The program will continue when the voltage is allowed again. voltage control Flashing: The program has been paused due to illegal undervoltages.
-
Page 24: Buttons
NL Tests 7 Keys The selection of the program settings depends on the program set. The selection options for each program are shown in the front view → "Programs", page 26. Knob Description Choice Start/Refill ¡ start Start, cancel or pause a programme. ¡... - Page 25 Tests NL Knob Description Choice Centrifuge Adjust the spin speed or – – – – - 1400 – – – – (rinse hold) activate. With the selection – – – – the water is not drained at the end of the wash cycle and the spin cycle is deactivated.
- Page 26 NL Programs i-Dos i-Dos prewash Spin – – – – (Rinse hold) – vario Speed max. spin speed 1400 1400 rental (rpm) max. temperature (°C) 90 max. load (kg)
- Page 27 Programs NL i-Dos i-Dos prewash Spin – – – – (Rinse hold) – vario Speed max. spin speed 1400 rental (rpm) – max. temperature (°C) max. load (kg)
- Page 28 NL Programs i-Dos i-Dos prewash Spin – – – – (Rinse hold) – vario Speed max. spin speed 1200 1400 rental (rpm) max. temperature (°C) max. load (kg)
- Page 29 Programs NL – – i-Dos – – – – i-Dos – – – – prewash Spin – – – – – (Rinse hold) – – – – vario Speed max. spin speed 140 0 1400 – rental (rpm) – – –...
- Page 30 NL Programs i-Dos i-Dos prewash Spin – – – – (Rinse hold) – vario Speed max. spin speed 1200 rental (rpm) max. temperature (°C) max. load (kg)
- Page 31 Programs NL – i-Dos – i-Dos – prewash Spin – – – – – (Rinse hold) – vario Speed max. spin speed 1200 rental (rpm) max. temperature (°C) – max. load (kg)
- Page 32 NL Programs – i-Dos – i-Dos – – prewash Spin – – – – (Rinse hold) – vario Speed max. spin speed 1200 rental (rpm) max. temperature (°C) max. load (kg)
- Page 33 Programs NL i-Dos i-Dos prewash Spin – – – – (Rinse hold) vario Speed max. spin speed rental (rpm) max. temperature (°C) max. load (kg)
-
Page 34: Accessories
NL accessories 9 Accessories Use only original accessories. These are adapted to the device. Usage Order number Cold water or Aquastop WZ10131 Extension water supply water supply hose feeding hose lengthen (2.50 m). Mounting brackets Improve the firmness WX975600 of the device. bend Fix the water drain hose. -
Page 35: Laundry
laundry NL Approx. Pour 1 liter of tap water Slide in the detergent drawer. into the manual dosing compartment. Press Start/Refill to to start the program. Place the powder detergent in the a The display shows the remaining manual dosing compartment. program duration. -
Page 36: Sorting The Laundry
NL laundry – Empty pockets 11.2 Sorting laundry – Brush sand from all covers and Remark: Take the information on the pockets zak topic of safety → Page 4 – Close duvet covers and and avoid material damage pillowcases → Page 11 take care of your device –... -
Page 37: Care Instructions On Care Labels
Detergent and laundry care product NL 11.4 Care instructions on care labels Wash care instructions Symbol Recommended program washing process normal Cotton carefully wrinkle resistance. very careful Delicates / silk for hand wash Wool Hand wash – not machine washable ¡... -
Page 38: Detergent Dosage
NL Detergent and laundry care product Textile Program- Temperature Laundry detergent Fur laundry from from cold to 60°C Fur/delicate detergent wrinkle resistance. wrinkle-resistant without optical white sel or synthetic resourse fibres from cold to 40°C Sensitive fine textiles Delicate detergent Delicate laundry/ silk made of silk or viscose... -
Page 39: The Ministry In Essence
The Ministry in essence NL ¡ When dosing manually, 13.2 Set program adjust the dosing amount to the Set the program selector to the actual loading amount. desired programme. → "Programs", Page 26 ¡ When the intelligent dosage is activated, do not adjust the dosing quantity to the actual load quantity. -
Page 40: Dosing Detergent And Care Agent
NL The Ministry in essence ¡ To prevent creasing, keep such as stain remover, starch or the maximum load of the bleach. Do not add additional → "Programs", Page 26 in detergent in the manual dosing compartment to avoid overdosing or take into account. -
Page 41: Soaking The Laundry
The Ministry in essence NL – Start the program at a high 13.8 Soaking laundry temperature To rinse. Remark: No additional detergent is – Start at a high water level required. The soapy water is then the program Centrifuge used for washing. or pump down. -
Page 42: Switching Off The Appliance
NL Child lock a The display shows reflected 13.13 Switch off device Apparaat to give. a The controls are Turn the program selector on from sets- blocked. a The childproof lock remains in effect even after the switching of the device activated. 14.2 Deactivate child lock Required: To deactivate the child lock, the appliance must be switched on. -
Page 43: Basic Dosing Quantity
Intelligent dosing system NL Open the filling cover. 15.2 Basic dosing amount The basic dosing amount is based on the information from the detergent manufacturer, the water hardness and the degree of soiling of the laundry. Always set a basic dosing amount, which is geared to a standard load of 4.5 kg. -
Page 44: Basic Settings
NL Basic settings 1 6 Basic settings You can set up your device according to your needs. 16.1 Overview of the basic settings Here you will find an overview of the basic settings of the device. Program- Description Basic setting Where the ling position... -
Page 45: Changing Basic Settings
Cleaning and maintenance NL 16.2 Changing basic settings Recent deposit Delete immediately all detergent gene can make residues, spray lighter and sun- Set the program selector to of the remains skin remnants or position 1. den removed. remaining residual aunts. The door of the residual water can device and the... - Page 46 NL Cleaning and maintenance Turn off the device. Empty the detergent drawer. Pull out the detergent drawer. Press the insert down and take out the detergent drawer. The pump unit 7. ATTENTION! contains electrical components. Do not put the pump unit in the dishwasher ▶...
-
Page 47: Descaling
Cleaning and maintenance NL Clean the detergent drawer and Clean the housing of the detergent lid with a soft, damp cloth or hand drawer in the appliance. shower. Slide in the detergent drawer. Insert the detergent drawer, dry 17.4 Descaling and install the lid and pump unit. - Page 48 NL Cleaning and maintenance Open the service door. Remove the drain hose from the holder. Remove the service cover. CAUTION - Chance of burns! The soapy water gets hot when washing at high temperatures. Do not touch the hot soapy water. ▶...
- Page 49 Cleaning and maintenance NL Clamp the drain hose in the Clean the interior, threads of the holder. pump cover and pump housing. Cleaning the drain pump Verify that the pump impeller rotates easily. Remark: Take the information on the topic of safety → Page 4 Fit the pump cover and tighten it and avoid material damage as far as it will go.
-
Page 50: Water Drain Hose On The Si- Fon Cleaning
NL Cleaning and maintenance Before the next wash Clean the water drain hose and the siphon connection. To prevent unused detergent from flowing into the drain during the next wash, run the programme Drain off after you have emptied the pump. Open the tap. - Page 51 Cleaning and maintenance NL Connect the water inlet hose and Cleaning the strainer of the water tap check for leaks. Remark: Take the information on the topic of safety → Page 4 and avoid material damage → Page 11 take care of your device to use safely.
- Page 52 NL Cleaning and maintenance Remove the sieve with pliers. Clean the sieve with a small brush. Reinstall the filter. Connect the hose and check for leaks.
-
Page 53: Troubleshooting
Troubleshooting NL 1 8 Troubleshooting You can remedy minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the device ▶... - Page 54 NL Troubleshooting Cause and Troubleshooting Malfunction "E:36 / -10" Unauthorized extension mounted on the water drain hose. Remove unauthorized extensions to the wa- ▶ discharge hose. Connect device "E:36 / -25 / -26" Drain pump is clogged. → " Cleaning the drain pump", page 47 ▶...
- Page 55 Troubleshooting NL Cause and Troubleshooting Malfunction flashes. The voltage monitoring system detects an impermissible voltage drop. No solution possible. ▶ Remark: When the supply voltage has stabilized, the program continues normally. Undervoltage can cause a program extension. No solution possible. flashes.
- Page 56 NL Troubleshooting Cause and Troubleshooting Malfunction Program does not start. Close the door. To start the program, press Start/Additional to fill. Child lock is activated. → " Deactivate child lock", page 42 ▶ is activated. Ready in Check if Ready in is activated.
- Page 57 Troubleshooting NL Cause and Troubleshooting Malfunction Door cannot be Power cut. opened. Open the door with the emergency release. ▶ → "Emergency release", Page 64 Drain pipe or water drain hose is clogged. Washing water is not pumped out. Clean the drain pipe and the water drain hose. ▶...
- Page 58 NL Troubleshooting Cause and Troubleshooting Malfunction No water flows into Make sure that the water inlet hose is not ▶ the device. The nods or clenches. detergent was not washed in. Start several times The imbalance control system eliminates the imbalance by distributing the laundry several times.
- Page 59 Troubleshooting NL Cause and Troubleshooting Malfunction Load recognition is active. Drum is spinning, er no water flows into No error, no action necessary. ▶ the appliance. Remark: The load detection can take up to 2 minutes. strong foam Detergent dosage is too high. ming.
- Page 60 NL Troubleshooting Cause and Troubleshooting Malfunction Program centrifugal Remark: If possible, place large and small items of laundry together in the drum. Laundry of different run does not start. sizes is more evenly distributed when spinning. Start the program Centrifuge. ▶...
- Page 61 Troubleshooting NL Cause and Troubleshooting Malfunction Spin result is Drain pipe or water drain hose is clogged. not to satisfaction- Clean the drain pipe and the water drain hose. ▶ ness. The laundry is Drain pipe or water drain hose is kinked or too wet / too damp.
- Page 62 NL Troubleshooting Cause and Troubleshooting Malfunction Detergents may contain water-insoluble Detergent residue on the dry laundry. substances, which deposit on the laundry. Brush the laundry after washing and drying. ▶ Unsuitable detergent has been placed in the dosing container of the intelligent dosing system. Check whether the detergent used is suitable.
- Page 63 Troubleshooting NL Cause and Troubleshooting Malfunction Refill the dosing containers. Insufficient cleaning → "Filling the dispenser", Page 42 next operation. The water inlet hose is not correctly / firmly At the water supply connected. feed hose is leaking water. Connect the water supply hose correctly. Connect water supply hoseslang Tighten the coupling properly.
-
Page 64: Transporting, Storing And Drain
NL Transport, storage and disposal Unplug the appliance from the 18.1 Emergency release mains. unlock door Deur Drain remaining soap. → "Clean the drain pump", Required: The drain pump is empty. → Page 47 Page 47 Disassemble the hoses. Running water can 1. -
Page 65: Restart Device Use
Transport, storage and disposal NL Fit all bolts of the 4 transport locks 19.3 Recommissioning the and tighten them slightly. device Remove the transport locks. Approx. Place 1 liter of water in the manual dosing compartment in the detergent drawer. The program Drain start. -
Page 66: Customer Service
NL customer service bring the device within the European You can obtain information about the Economic Area from our after-sales current disposal methods from your service. dealer and your municipal or district council office. Remark: Calling in the service department within the framework of the manufacturer's This appliance has been warranty conditions is free of charge. -
Page 67: Consumption Values
Consumption values NL 1 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The specified values for other programs asEco 40 - 60 are only guide values and were determined in accordance with the applicable standard EN60456. -
Page 68: Technical Data
NL Technical data le EU product database EPREL, the URL 2 2 Technical data of which had not yet been published at the time of printing. Then follow the figures and facts about the device instructions when searching for the can be found here. - Page 72 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 Munich GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark license of Siemens AG * 9001614206* 9001614206 (010217)