Table of Contents
Advertisement
Chapter 5
Configuring the Layer 2 Tunnel Protocol Access Concentrator and Network Server
L2TP Network Server
!
interface Virtual-Template2
ip unnumbered Loopback1
peer default ip address pool vpdn-pool2
ppp authentication chap
!
interface FastEthernet0
no ip address
no ip mroute-cache
shutdown
duplex auto
speed auto
no cdp enable
!
ip local pool vpdn-pool1 172.16.5.1 172.16.128.100
ip local pool vpdn-pool2 10.0.0.1 10.0.0.100
ip default-gateway 10.1.26.254
ip classless
ip route 0.0.0.0 0.0.0.0 10.1.26.254
ip route 192.168.1.2 255.255.255.255 10.1.26.254
no ip http server
ip pim bidir-enable
!
!
dialer-list 1 protocol ip permit
no cdp run
!
!
radius-server host 172.16.192.80 auth-port 1645 acct-port 1646 key rad123
radius-server retransmit 3
call rsvp-sync
RADIUS Tunnel Accounting Records
Example 5-19
and
Example 5-20
show RADIUS tunnel accounting record types.
Example 5-19 RADIUS Tunnel Accounting Record
User-Name = gomer1@hello101
NAS-IP-Address = 23.1.2.10
NAS-Port = 550
Service-Type = Framed
Framed-Protocol = PPP
Ascend-Multilink-ID = 2877
Tunnel-Type_tag0 = L2TP
Tunnel-Medium-Type_tag0 = IPv4
Tunnel-Client-Endpoint_tag0 = 10.2.2.1
Tunnel-Server-Endpoint_tag0 = 10.2.2.2
Acct-Status-Type = Tunnel-Link-Start
Acct-Delay-Time = 0
Acct-Session-Id = 00000B42
Acct-Authentic = RADIUS
Acct-Multi-Session-Id = 00000B3D
Tunnel-Client-Auth-ID_tag0 = LAC1
Tunnel-Server-Auth-ID_tag0 = LNS1
NAS-Port-Type = Virtual
Acct-Tunnel-Connection = 1088401809
Cisco 10000 Series Router Software Configuration Guide
5-49
OL-2226-23
Advertisement
Table of Contents
Troubleshooting
