hit counter script

Working With Software Images; Image Location On The Bridge; Tar File Format Of Images On A Server Or Cisco.com - Cisco CISCO1401 - 1401 Router - EN Software Manual

Wireless bridge
Table of Contents

Advertisement

Chapter 17
Managing Firmware and Configurations

Working with Software Images

This section describes how to archive (download and upload) software image files, which contain the
system software, IOS code, radio firmware, and the web management HTML files.
You download an bridge image file from a TFTP, FTP, or RCP server to upgrade the bridge software.
You upload an bridge image file to a TFTP, FTP, or RCP server for backup purposes. You can use this
uploaded image for future downloads to the same bridge or another of the same type.
The protocol you use depends on which type of server you are using. The FTP and RCP transport
mechanisms provide faster performance and more reliable delivery of data than TFTP. These
improvements are possible because FTP and RCP are built on and use the Transmission Control
Protocol/Internet Protocol (TCP/IP) stack, which is connection-oriented.
This section includes this information:
For a list of software images and supported upgrade paths, refer to the release notes for your bridge.
Note

Image Location on the Bridge

The IOS image is stored in a directory that shows the version number. A subdirectory contains the HTML
files needed for web management. The image is stored on the system board Flash memory (flash:).
You can use the show version privileged EXEC command to see the software version that is currently
running on your bridge. In the display, check the line that begins with
the directory name in Flash memory where the image is stored.
You can also use the dir filesystem: privileged EXEC command to see the directory names of other
software images you might have stored in Flash memory.

tar File Format of Images on a Server or Cisco.com

Software images located on a server or downloaded from Cisco.com are provided in a tar file format,
which contains these files:
OL-4059-01
Image Location on the Bridge, page 17-19
tar File Format of Images on a Server or Cisco.com, page 17-19
Copying Image Files by Using TFTP, page 17-20
Copying Image Files by Using FTP, page 17-23
Copying Image Files by Using RCP, page 17-27
Reloading the Image Using the Web Browser Interface, page 17-32
Reloading the Image Using the Power Injector MODE button, page 17-33
info file
The info file is always at the beginning of the tar file and contains information about the files within
it.
IOS image
Web management files needed by the HTTP server on the bridge
radio firmware 5000.img file
Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide
Working with Software Images
System image file is...
It shows
17-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cisco1417 - 1417 router - enAironet 1400 series

Table of Contents