Table of Contents
Advertisement
Controlling Bridge Access with TACACS+
Command
Step 3
aaa authentication login {default |
list-name} method1 [method2...]
Step 4
line [console | tty | vty] line-number
[ending-line-number]
Step 5
login authentication {default |
list-name}
Step 6
end
Step 7
show running-config
Step 8
copy running-config startup-config
To disable AAA, use the no aaa new-model global configuration command. To disable AAA
authentication, use the no aaa authentication login {default | list-name} method1 [method2...] global
configuration command. To either disable TACACS+ authentication for logins or to return to the default
value, use the no login authentication {default | list-name} line configuration command.
Configuring TACACS+ Authorization for Privileged EXEC Access and Network
Services
AAA authorization limits the services available to a user. When AAA authorization is enabled, the
bridge uses information retrieved from the user's profile, which is located either in the local user
database or on the security server, to configure the user's session. The user is granted access to a
requested service only if the information in the user profile allows it.
You can use the aaa authorization global configuration command with the tacacs+ keyword to set
parameters that restrict a user's network access to privileged EXEC mode.
The aaa authorization exec tacacs+ local command sets these authorization parameters:
Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide
5-14
Purpose
Create a login authentication method list.
•
To create a default list that is used when a named list is not specified
in the login authentication command, use the default keyword
followed by the methods that are to be used in default situations. The
default method list is automatically applied to all interfaces.
For list-name, specify a character string to name the list you are
•
creating.
For method1..., specify the actual method the authentication
•
algorithm tries. The additional methods of authentication are used
only if the previous method returns an error, not if it fails.
Select one of these methods:
local—Use the local username database for authentication. You must
•
enter username information into the database. Use the username
password global configuration command.
•
tacacs+—Use TACACS+ authentication. You must configure the
TACACS+ server before you can use this authentication method.
Enter line configuration mode, and configure the lines to which you want
to apply the authentication list.
Apply the authentication list to a line or set of lines.
If you specify default, use the default list created with the aaa
•
authentication login command.
•
For list-name, specify the list created with the aaa authentication
login command.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Chapter 5
Administering the Bridge
OL-4059-01
Advertisement
Table of Contents
