Table of Contents
Advertisement
Configuring Security
Defining Management Access Method
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business 200 Series Smart Switch Administration Guide
•
Source IP Address—IP addresses or subnets that are allowed access.
Active Access Profile
Access Profiles
The
enables selecting one access profile to be the active one.
When a user attempts to access the switch through an access method, the switch
looks to see if the active access profile explicitly permits management access to
the switch through this method. If no match is found, access is denied.
When an attempt to access the switch is in violation of the active access profile,
the switch generates a SYSLOG message to alert the system administrator of the
attempt.
For more information see
Use the
Access Profiles
the access profile only contains a single rule, you are finished. To add additional
rules to the profile, use the Profile Rules page.
Click Security > Mgmt Access Method > Access Profiles. The Access Profiles
page is displayed.
This page displays all of the access profiles, active and inactive.
To change the active access profile, select a profile from the Active Access
Profile drop down menu and click Apply. This makes the chosen profile the active
access profile.
A caution message displays if you selected any other access profile, warning you
that, depending on the selected access profile, you might be disconnected from
the web-based switch configuration utility.
Click OK to select the active access profile or click Cancel to discontinue the
action.
Click Add to open the Add Access Profile page. The page allows you to configure
a new profile and one rule.
Enter the Access Profile Name. This name can contain up to 32 characters.
Enter the parameters.
page displays the access profiles that are defined and
Defining Profile
page to create an access profile and to add its first rule. If
Rules.
17
233
Hide quick links:
Advertisement
Table of Contents
