Table of Contents
Advertisement
Configuring Discovery
Configuring LLDP
Cisco Small Business 200 Series Smart Switch Administration Guide
•
Address—Returned address most appropriate for management use, .
•
Interface Subtype—Numbering method used for defining the interface
number.
•
Interface Number—Specific interface associated with this management
address.
MAC/PHY Details
•
Auto-Negotiation Supported—Port speed auto-negotiation support status.
•
Auto-Negotiation Enabled—Port speed auto-negotiation active status.
•
Auto-Negotiation Advertised Capabilities—Port speed auto-negotiation
capabilities; for example, 1000BASE-T half duplex mode, 100BASE-TX full
duplex mode.
•
Operational MAU Type—Medium Attachment Unit (MAU) type. The MAU
performs physical layer functions, including digital data conversion from the
Ethernet interfaces' collision detection and bit injection into the network; for
example, 100BASE-TX full duplex mode.
802.3 Details
•
802.3 Maximum Frame Size—The maximum supported IEEE 802.3 frame
size.
802.3 Link Aggregation
•
Aggregation Capability—Indicates whether the interface can be
aggregated.
•
Aggregation Status—Indicates whether the interface is aggregated.
•
Aggregation Port ID—Advertised aggregated interface ID.
802.3 Energy Efficient Ethernet (EEE) (If device supports EEE)
•
Local Tx—Indicates the time (in micro seconds) that the transmitting link
partner waits before it starts transmitting data after leaving Low Power Idle
(LPI mode).
•
Local Rx—Indicates the time (in micro seconds) that the receiving link
partner requests that the transmitting link partner waits before transmission
of data following Low Power Idle (LPI mode).
•
Remote Tx Echo—Indicates the local link partner's reflection of the remote
link partner's Tx value.
8
82
Hide quick links:
Advertisement
Table of Contents
