Table of Contents
Advertisement
Configuring Discovery
Configuring LLDP
STEP 3
STEP 4
STEP 1
STEP 2
Cisco Small Business 200 Series Smart Switch Administration Guide
In the Fast Start Repeat Count field, enter the number of times LLDP packets are
sent when the LLDP-MED Fast Start mechanism is initialized. This occurs when a
new endpoint device links to the switch. For a description of LLDP MED, refer to
the LLDP MED Network Policy section.
Click Apply. The LLDP properties are added to the Running Configuration file.
Editing LLDP Port Settings
Port Settings
Use the
port, and to select the TLVs included in LLDP PDUs.
The LLDP-MED TLVs to be advertised can be selected in the LLDP MED Port
Settings page, and the management address TLV of the switch may be
configured.
To define the LLDP port settings:
Click Administration > Discovery - LLDP > Port Settings. The
opens.
This page displays the port LLDP information.
Select a port and click Edit. The Edit LLDP Port Settings page opens.
This page provides the following fields:
•
Interface—Select the port to edit.
•
Administrative Status—Select the LLDP publishing option for the port. The
values are:
-
Tx Only—Publishes but does not discover.
-
Rx Only—Discovers but does not publish.
-
Tx & Rx—Publishes and discovers.
-
Disable—Indicates that LLDP is disabled on the port.
•
System Log Notification—Select Enable to notify notification recipients
that there has been a topology change.
The time interval between notifications is entered in the Topology Change
System Log Notification Interval field in the
page to activate LLDP and remote log server notification per
Port Settings
LLDP Properties
page.
8
page
74
Hide quick links:
Advertisement
Table of Contents
