Disabling Nde; Removing The Nde Ip Address; Displaying The Nde Configuration - Cisco WS-C6506 Software Manual

Catalyst 6500 series switch

Hide thumbs Also See for WS-C6506:

Table of Contents

Configuring NDE on the Switch

This example shows how to clear the NDE flow filter so that all the flows are exported:

Console> (enable) clear mls nde flow

Netflow data export filter cleared.

Console> (enable)

Disabling NDE

With Supervisor Engine 1 and a PFC, if NDE is enabled and you disable MLS, you lose the statistics for

existing cache entries because the statistics are not exported.

To disable NDE on the switch, perform this task in privileged mode:

Disable NDE on the switch.

This example shows how to disable NDE on the switch:

Console> (enable) set mls nde disable

Netflow data export disabled.

Console> (enable)

To remove the NDE IP address from the MSFC, perform this task in global configuration mode:

Remove the NDE IP address from the

This example shows how to remove the NDE IP address from the MSFC:

Router(config)# no mls nde-address 170.170.2.1

Router(config)#

To display the NDE configuration on the switch, perform this task in privileged mode:

Display the NDE configuration on the

Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7

set mls nde disable

Router(config)# no mls nde-address [ip_addr]

show mls nde

Configuring NDE

Show Quick Links

Table of Contents

Catalyst 6506 Catalyst 6509 Catalyst 6513