Table of Contents
Advertisement
Chapter 11
Configuring VLANs
Make sure that you assign the switch ports to a VLAN of the proper type. For example, assign the
Note
Ethernet, Fast Ethernet, and Gigabit Ethernet ports to the Ethernet-type VLANs.
To assign one or more switch ports to a VLAN, perform this task in privileged mode:
Task
Step 1
Assign one or more switch ports to a VLAN.
Step 2
Verify the port VLAN membership.
This example shows how to assign the switch ports to a VLAN and verify the assignment:
Console> (enable) set vlan 560 4/10
VLAN 560 modified.
VLAN 1 modified.
VLAN
---- -----------------------
560
Console> (enable) show vlan 560
VLAN Name
---- -------------------------------- --------- ------- ------------------------
560
VLAN Type
---- ----- ---------- ----- ------ ------ ------ ---- -------- ------ ------
560
VLAN AREHops STEHops Backup CRF
---- ------- ------- ----------
Console> (enable) show port 4/10
Port
----- ------------------ ---------- ---------- ------ ----- ------------
4/10
Port
----- ------------- --------------
4/10
.
.
.
Last-Time-Cleared
--------------------------
Tue Jun 6 2000, 16:45:18
Console> (enable)
OL-8978-04
Mod/Ports
4/10
Engineering
SAID
MTU
enet
100560
1500
Name
Status
connected
AuxiliaryVlan AuxVlan-Status
none
none
Command
set vlan vlan mod/port
show vlan [vlan]
show port [mod[/port]]
Status
IfIndex Mod/Ports, Vlans
active
348
Parent RingNo BrdgNo Stp
-
-
-
-
Vlan
Duplex Speed Type
560
a-half a-100 10/100BaseTX
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Assigning Switch Ports to a VLAN
4/10
BrdgMode Trans1 Trans2
-
0
0
11-11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
