Cisco Catalyst 3750 Command Reference Manual page 371

Hide thumbs Also See for Catalyst 3750:

Table of Contents

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

This example shows how to display information about stack member 3 from the master switch:

Switch> show env stack 3

TEMPERATURE is OK

RPS is NOT PRESENT

This example shows how to display the temperature value, state, and the threshold values.

describes the temperature states in the command output.

Switch> show env temperature status

Temperature Value:28 Degree Celsius

Temperature State:GREEN

Yellow Threshold :70 Degree Celsius

Red Threshold

Table 2-22 States in the show env temperature status Command Output

:75 Degree Celsius

The switch temperature is in the normal operating range.

The temperature is in the warning range. You should check the external temperature

around the switch.

The temperature is in the critical range. The switch might not run properly if the

temperature is in this range.

Catalyst 3750 Switch Command Reference