Show Arp Access-List - Cisco Catalyst 3750 Command Reference Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
show arp access-list
show arp access-list
Use the show arp access-list user EXEC command to display detailed information about Address
Resolution Protocol (ARP) access lists.
This command is available only if your switch is running the enhanced multilayer image (EMI).
Syntax Description
acl-name
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(20)SE
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output from the show arp access-list command:
Switch> show arp access-list
ARP access list rose
Related Commands
Command
arp access-list
deny (ARP access-list
configuration)
ip arp inspection filter vlan
permit (ARP access-list
configuration)
Catalyst 3750 Switch Command Reference
2-302
show arp access-list [acl-name] [ | {begin | exclude | include} expression]
(Optional) Name of the ACL.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
permit ip 10.101.1.1 0.0.0.255 mac any
permit ip 20.3.1.0 0.0.0.255 mac any
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Description
Defines an ARP access control list (ACL).
Denies an ARP packet based on matches against the DHCP bindings.
Permits ARP requests and responses from a host configured with a
static IP address.
Permits an ARP packet based on matches against the DHCP bindings.
78-16181-03
Advertisement
Table of Contents
