Clear Ip Arp Inspection Statistics - Cisco Catalyst 3750 Command Reference Manual

Hide thumbs Also See for Catalyst 3750:

Table of Contents

Catalyst 3750 Switch Cisco IOS Commands

clear ip arp inspection statistics

Use the clear ip arp inspection statistics privileged EXEC command on the switch stack or on a

standalone switch to clear the dynamic Address Resolution Protocol (ARP) inspection statistics.

This command is available only if your switch is running the enhanced multilayer image (EMI).

Syntax Description

vlan vlan-range

No default is defined.

Command Modes

Privileged EXEC

Command History

This example shows how to clear the statistics from VLAN 1:

Switch# clear ip arp inspection statistics vlan 1

You can verify that the statistics were deleted by entering the show ip arp inspection statistics vlan 1

privileged EXEC command.

Related Commands

show ip arp inspection

clear ip arp inspection statistics [vlan vlan-range]

(Optional) Clear statistics for the specified VLAN or VLANs.

You can specify a single VLAN identified by VLAN ID number, a range of

VLANs separated by a hyphen, or a series of VLANs separated by a comma.

The range is 1 to 4094.

Modification

This command was introduced.

Displays statistics for forwarded, dropped, MAC validation failure, and

IP validation failure packets for all VLANs or the specified VLAN.

Catalyst 3750 Switch Command Reference

clear ip arp inspection statistics