Debug Platform Device-Manager - Cisco Catalyst 3750 Command Reference Manual

Hide thumbs Also See for Catalyst 3750:

Table of Contents

debug platform device-manager

Use the debug platform device-manager privileged EXEC command to enable debugging of the

platform-dependent device manager. Use the no form of this command to disable debugging.

Syntax Description

port-download

Debugging is disabled.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

The undebug platform device-manager command is the same as the no debug platform

device-manager command.

When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack

member, you can start a session from the stack master by using the session switch-number privileged

EXEC command. Then enter the debug command at the command-line prompt of the stack member. You

also can use the remote command stack-member-number LINE privileged EXEC command on the stack

master switch to enable debugging on a member switch without first starting a session.

Related Commands

show debugging

Catalyst 3750 Switch Command Reference

debug platform device-manager {all | device-info | poll | port-download | trace}

no debug platform device-manager {all | device-info | poll | port-download | trace}

Display all platform device manager debug messages.

Display platform device manager device structure debug messages.

Display platform device manager 1-second poll debug messages.

Display platform device manager remote procedure call (RPC) usage debug

Trace platform device manager function entry and exit debug messages.

Modification

This command was introduced.

Displays information about the types of debugging that are enabled. For

syntax information, select Cisco IOS Release 12.2 Configuration Guides

and Command References > Cisco IOS Configuration Fundamentals

Configuration Guide, Release 12.2 > System Management >

Troubleshooting and Fault Management.

Catalyst 3750 Switch Debug Commands