Class-Map - Cisco Catalyst 3750 Command Reference Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
class-map
class-map
Use the class-map global configuration command on the switch stack or on a standalone switch to create
a class map to be used for matching packets to the class whose name you specify and to enter class-map
configuration mode. Use the no form of this command to delete an existing class map and to return to
global configuration mode.
Syntax Description
match-all
match-any
class-map-name
Defaults
No class maps are defined.
If neither the match-all or match-any keyword is specified, the default is match-all.
Command Modes
Global configuration
Command History
Release
12.1(11)AX
Usage Guidelines
Use this command to specify the name of the class for which you want to create or modify class-map
match criteria and to enter class-map configuration mode.
The class-map command and its subcommands are used to define packet classification, marking, and
aggregate policing as part of a globally named service policy applied on a per-port basis.
After you are in quality of service (QoS) class-map configuration mode, these configuration commands
are available:
•
•
•
•
•
Catalyst 3750 Switch Command Reference
2-42
class-map [match-all | match-any] class-map-name
no class-map [match-all | match-any] class-map-name
(Optional) Perform a logical-AND of all matching statements under this class
map. All criteria in the class map must be matched.
(Optional) Perform a logical-OR of the matching statements under this class
map. One or more criteria must be matched.
Name of the class map.
Modification
This command was introduced.
description: describes the class map (up to 200 characters). The show class-map privileged EXEC
command displays the description and the name of the class-map.
exit: exits from QoS class-map configuration mode.
match: configures classification criteria. For more information, see the
configuration)
command.
no: removes a match statement from a class map.
rename: renames the current class map. If you rename a class map with a name that is already used,
the message
A class-map with this name already exists
Chapter 2
Catalyst 3750 Switch Cisco IOS Commands
match (class-map
appears.
78-16181-03
Advertisement
Table of Contents
