Debug Platform Ipc - Cisco Catalyst 3750-X Command Reference Manual

Cisco ios release 15.2(1)e and later

Hide thumbs Also See for Catalyst 3750-X:

Table of Contents

Catalyst 3750-X and 3560-X Switch Debug Commands

debug platform ipc

Use the debug platform ipc privileged EXEC command to enable debugging of the platform-dependent

Interprocess Communication (IPC) Protocol. Use the no form of this command to disable debugging.

This command is supported only on Catalyst 3750-X switches.

Syntax Description

Debugging is disabled.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

The undebug platform ipc command is the same as the no debug platform ipc.

When you enable debugging on a switch stack, it is enabled only on the stack master. To enable

debugging on a stack member, you can start a session from the stack master by using the session

switch-number privileged EXEC command. Then enter the debug command at the command-line

prompt of the stack member. You also can use the remote command stack-member-number LINE

privileged EXEC command on the stack master switch to enable debugging on a member switch without

first starting a session.

Related Commands

show debugging

debug platform ipc {all | init | receive | send | trace}

no debug platform {all | init | receive | send | trace}

Display all platform IPC debug messages.

Using this command can degrade the performance of the switch.

Display debug messages related to IPC initialization.

Display IPC traces each time an IPC packet is received by the switch.

Display IPC traces each time an IPC packet is sent by the switch.

Display IPC trace debug messages, tracing the code path as the IPC functions are

Modification

This command was introduced.

Displays information about the types of debugging that are enabled.

Catalyst 3750-X and 3560-X Switch Command Reference

debug platform ipc

Catalyst 3560-x